558054
9
Zoom out
Zoom in
Previous page
1/48
Next page
Operators Manual 5
A FRESH APPROACH TO VENDING
7. All Models: Rotate soluble/freshbrew ingredient canister outlets to upright position.
Remove the milk canister from the machine and remove
the lid. Place the canister into the canister filling station
located on the door (a) and fill canister with correct
ingredient.
DO NOT place the canister on the floor or overfill with
ingredient.
Carefully remove the canister from the filling station and
replace the lid. Refit canister into machine ensuring that
it is returned to correct operating station.
Repeatthisoperation forall soluble/freshbrew ingredient
canisters fitted to the machine. Rotate the canister outlets
totheir correctoperating positions.
8. Press the Cup Test button (7), located in the Service
Keypad on the rear of the door and ensure that a cup is
ejected cleanly from the cup drop unit.
9. Press the Park Head button (8), located in the Service
Keypad on the rear of the door and ensure that the
dispense head moves to its fully extended position.
Press the button again to return the dispense head to its
correct (homed) position.
10. If fitted, check that the coin mechanism and cash box
operate correctly. To do this, swing the cover away from
the door (b). Fill the coin tubes with correct coinage.
Ensure coin return mechanism functions correctly.
11. Operate the machine through its complete range of
selections to ensure that each vend is correctly
dispensed. Follow the instructions detailed in Service
Keypad Functions for making a vend using the Test
Vend button (6).
12. Close the cabinet door. Ensure that the machine is left
in a clean and safe condition.
2.5 Warranty card
Please complete and return the warranty card that comes with the machine. Use the card to note
any problems you encountered during installation, your feedback helps us to improve our products
and services. Return the warranty card, whether problems were encountered or not, failure to may
invalidate your warranty.
Section 2 - Installation (Engineerʼs Procedure)
a
b
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Autobar Infinity at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Autobar Infinity in the language / languages: English as an attachment in your email.

The manual is 1,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Autobar Infinity

Autobar Infinity Installation Guide - Dutch - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info