Manual Autel MaxiService EBS301 (page 25 of 59) (English)

586066

Zoom out

Zoom in

1/59

 If the manufacturer of your vehicle is not listed, use the

UP/DOWN scroll button to select Other and press the OK

button.

5.2 Erase Codes

CAUTION: Erasing the Diagnostic Trouble Codes may allow the

scan tool to delete not only the codes from the vehicle’s on-board

computer, but also “Freeze Frame” data and manufacturer

specific enhanced data. Further, the I/M Readiness Monitor Status

for all vehicle monitors is reset to Not Ready or Not Complete

status. Do not erase the codes before the system has been checked

completely by a technician.

NOTE: Erasing codes does not mean that trouble codes in

ECU have been eliminated completely. As long as there is

fault with the vehicle, the trouble codes keeps on presenting.

 This function is performed with key on engine off (KOEO). Do

not start the engine.

1) Use the UP/DOWN scroll buttons to select Erase Codes from

Diagnostics Menu and press the OK button. (Figure 5.3)

2) After you have pressed OK button, a message will come up

asking you to check the ignition and engine status. (Figure 5.6)

Figure 5.6

3. If you press Yes function key or OK button, a warning message

will come up asking your confirmation. (Figure 5.7)

Erase Codes

Ignition on and engine stopped?

Yes No .

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Autel MaxiService EBS301 in the language / languages: English as an attachment in your email.

The manual is 0,97 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Autel MaxiService EBS301 Manual

Product: