Manual Autel MaxiService EBS301 (page 23 of 59) (English)

586066

Zoom out

Zoom in

1/59

more than a specified amount of key-cycles. These codes will

cause the control module to illuminate the malfunction

indicator light (MIL) when emission-related fault occurs.

 Pending Codes are also referred to as “maturing codes” or

“continuous monitor codes”. They indicate problems that the

control module has detected during the current or last driving

cycle but are not considered serious yet. Pending Codes will

not turn on the malfunction indicator lamp (MIL). If the fault

does not occur within a certain number of warm-up cycles, the

code clears from memory.

 Permanent Codes are DTCs that are "confirmed" and are

retained in the non-volatile memory of the computer until the

appropriate monitor for each DTC has determined that the

malfunction is no longer present and is not commanding the

MIL on. Permanent DTC shall be stored in non-volatile

memory and may not be erased by any diagnostic services or

by disconnecting power to ECU.

1) Use UP/DOWN scroll button to select Read Codes from

Diagnostic Menu and press OK button. (Figure 5.3 )

Figure 5.3

2) Use the UP/DOWN scroll button to select Stored Codes,

Pending Codes or Permanent Codes from the Read Codes

menu and press the OK button. (Figure 5.4 )

Diagnostic Menu

1.System Status

2.Read Codes

3.Erase Codes

4.Live Data

5.Freeze Frame

6.I/M Readiness

7.O2 Monitor Test

8.On-Board Monitor Test

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Autel MaxiService EBS301 in the language / languages: English as an attachment in your email.

The manual is 0,97 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Autel MaxiService EBS301 Manual

Product: