694349
74
Zoom out
Zoom in
Previous page
1/88
Next page
english 72
Tap the screen (if it is still in idle mode) to leave idle mode. If the display is not currently in idle mode, skip
this step.
The system displays the following:
Tap FULL after you have topped up with fuel
Tap ''OK'' to save your settings. The fuel bar shows full:
4.11. Display brightness
You have different options on the control panel for setting the brightness of the display. Thanks to the
integrated ambient light sensor, the control panel can adapt the display brightness automatically.
4.11.1. Setting automatic brightness adjustment
Tap the screen (if it is still in idle mode) to leave idle mode. If the display is not currently in idle mode, skip
this step.
. “Display options” “Display
brightness”
''Automatisch OFF/ON''
4.11.2. Setting active display brightness
Tap the screen (if it is still in idle mode) to leave idle mode. If the display is not currently in idle mode, skip
this step.
. “Display options” “Display
brightness”
Set the desired display brightness by tapping the
and/or symbols next to the “Brightness active”
label. The system saves the changes immediately.
! NOTE:Ifautomaticbrightnessadjustmentisactive,thisoptionisdeactivated.
4.11.3. Setting the display brightness in idle mode
You can increase or decrease the display brightness in idle mode to save energy. When you touch the
keypad, the display brightness is increased to the default value.
To set the display brightness in idle mode, proceed as follows:
73 english
Tap the screen (if it is still in idle mode) to leave idle mode. If the display is not currently in idle mode, skip
this step.
. “Display options” “Display
brightness”
Set the desired display brightness in idle mode by tapping the
and/or symbols next to the “Idle
disp. bright.” label. The system saves the changes immediately.
! NOTE:Ifautomaticbrightnessadjustmentisactive,thisoptionisdeactivated.
4.12. Activating the eco mode function
If the temperature rises above the target value, the heating device switches off automatically. It is
restarted automatically when the temperature drops below the target value.
To activate/deactivate the eco mode function, proceed as follows:
Tap the screen (if it is still in idle mode) to leave idle mode. If the display is not currently in idle mode, skip
this step.
''Eco mode'',
Tap “On” to activate.
Select the desired “Restart temp.” This temperature specifies the value below the set target temperature
from which onwards the stove switches back on.
Select “Eco Mod. Temp.” This temperature specifies the value above the set target temperature from
which onwards the stove switches off.
4.13. Standby mode settings
The control panel switches to standby mode automatically after 30 seconds of inactivity and leaves this
mode when you touch it again. Depending on the settings for standby mode, the control panel shows the
following:
The time, the air temperature, the logo or a sequence of these displays
The status of the heating device (if it is OFF)
Fuel autonomy (if activated)
Error/alarms (if present)
To make idle display mode settings, proceed as follows:
Tap the screen (if it is still in idle mode) to leave idle mode. If the display is not currently in idle mode, skip
this step.
. “Display options” “Standby mode”
Activate the information that you want to display in standby mode by tapping the ''On/Off'' symbol
(multiple selection is possible).
4.14. Setting the loudspeaker volume
You can set the volume of the integrated loudspeakers or switch them off altogether.
To select the desired loudspeaker volume, proceed as follows:
englisch
74


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Austroflamm Polly light at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Austroflamm Polly light in the language / languages: English, German, French as an attachment in your email.

The manual is 5,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Austroflamm Polly light

Austroflamm Polly light User Manual - Dutch - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info