694349
72
Zoom out
Zoom in
Previous page
1/88
Next page
english 70
Table 15 - Correct use of the week timer (example)
To set the week timer, proceed as follows:
Tap the screen (if it is still in idle mode) to leave idle mode. If the display is not currently in idle mode, skip
this step.
''Add new timer''
Select the day(s) of the time interval that you want to display by tapping the appropriate
abbreviation (Mon = Monday, Tue = Tuesday, Wed = Wednesday, Thu = Thursday, Fri = Friday,
Sat = Saturday, Sun = Sunday).
Set the start time (hours and minutes) by tapping “Start time’’ and then the
and/or
symbols. Tap ''OK'' to save your settings.
Set the end time (hours and minutes) by tapping “End time’’ and then the
and/or
symbols. Tap ''OK'' to save your settings. Tap to get to the temperature.
Set the target temperature by tapping the
and/or symbols. Tap ''Save'' or to save your
settings. If you change your mind, tap on “Delete” and the time interval is not saved.
To activate the set week timer, tap “ON” at the top right in the Timer menu. To deactivate the set
week timer, tap “OFF” in the Timer menu.
Tap
to exit the Timer menu.
! NOTE:If the currently measured temperature is higher than the set target temperature, the
system does not switch on the pellet stove until the temperature has dropped below the
target value.
71 english
!
NOTE: Ben, Polly light and Percy light do not have a tilting grate. This means that you can only
use the “"Week timer” to a limited extent. Once ash cake covers the base of the burner bowl above
the ignition hole, it is no longer possible to carry out automatic ignition. This means that you must
empty the burner bowl in good time to be able to start your pellet stove reliably using the timer
function. With models that do not have a tilting grate, we recommend setting a maximum of one
timer per day.
4.8. Statistics
To view the statistical data of your pellet stove, proceed as follows:
Tap the screen (if it is still in idle mode) to leave idle mode. If the display is not currently in idle mode, skip
this step.
Select the desired period.
4.9. Setting the pellet quality
You can set three different pellet qualities.
Fuel quality 1 is a very high quality. Fuel quality 3 is a very low quality (a high proportion of softwood,
dusty, low calorific value). The default “Fuel” setting is fuel quality 2.
To select the fuel quality, proceed as follows:
Tap the screen (if it is still in idle mode) to leave idle mode. If the display is not currently in idle mode, skip
this step.
''Fuel''
Set the desired fuel quality by tapping the
and/or symbols. The system saves the
changes immediately.
10.4. Activating monitoring of fuel autonomy
The pellet stove’s controller can calculate how long the amount of pellets in the stove can last for. You
can read this off the control panel. This option must be activated first.
Tap the screen (if it is still in idle mode) to leave idle mode. If the display is not currently in idle mode, skip
this step.
“Fuel” "Fuel autonomy""ON".
4.10. Resetting fuel autonomy after filling the fuel tank
After you have filled the pellet tank, you must reset fuel autonomy.
To reset fuel autonomy, proceed as follows:
englisch
72


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Austroflamm Polly light at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Austroflamm Polly light in the language / languages: English, German, French as an attachment in your email.

The manual is 5,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Austroflamm Polly light

Austroflamm Polly light User Manual - Dutch - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info