815458
95
Zoom out
Zoom in
Previous page
1/122
Next page
Operating manual Fireplace inserts slied flat + II EN 11 | Installation
95
1
3
2
Fig.69: Removing the parts
6) Remove centre stone tension support (1).
7) Remove the two M6x12 hexagon head screws (2).
8) Remove primary air cover (3).
ðNow InsertControl can be installed.
1
Fig.70: Installing the installation kit
In the following illustration the 363000 installation kit has
been installed in the left-hand version.
Depending on the appliance, installation kit and left- or
right-hand assembly situation, for installing the mounting,
other screws will have to be removed and installed again.
You can find this in the illustrations showing the assembly
situations of your stove/installation kit and in the detailed
drawing in the installation kit.
9) Install the installation kit (1) as shown.
ðAfter installing the installation kit, check the free
movement of the air regulator.
10) To do so, move the air regulator several times from
the minimum position to the maximum position.
Should there be no free movement of the air regu-
lator, check the following:
ðHas the installation kit been correctly installed.
ðAre the screw joints on the air regulator disc ex-
cessively tightened?
If the air regulator can be easily adjusted, the assembly of
the connection between installation kit and control unit can
be continued.
1
2
3
Fig.71: Installing the control unit
11) Remove the two M10x1 (1) and the M5 nut with flange
(2) and the spacer connecting plate (3).
For the connection between control unit and installation kit
you will require the following part from the installation kit:
2 x Taptite hex. LKS M5x10
2 x flange Bowden cable
Torx screwdriver (not included in the scope of delivery)
The installation point of the control unit must be chosen so
that the following items are guaranteed:
The ambient temperature of the control unit must not
exceed 50°C.
The control unit must be accessible.
A maximum of 2 curves must be laid with the Bowden
cable.
The curve radius of the Bowden cable must not be smal-
ler than 100 mm.
95


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Austroflamm Fireplace inserts slied flat II - Kamineinsatz Schieb flach II at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Austroflamm Fireplace inserts slied flat II - Kamineinsatz Schieb flach II in the language / languages: English as an attachment in your email.

The manual is 14.06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Austroflamm Fireplace inserts slied flat II - Kamineinsatz Schieb flach II

Austroflamm Fireplace inserts slied flat II - Kamineinsatz Schieb flach II User Manual - German - 124 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info