694346
68
Zoom out
Zoom in
Previous page
1/88
Next page
english 66
3. Fuel
Different quality pellets also cause different "crusting" in the burner bowl and on the grate of the pellet
stove. In this connection, we recommend using pellets that do not contain artificial binding agents and
which leave the smallest possible amount of unburned residue (in accordance with ÖN EN 14961-2 or
ENplus A1 or the equivalent).
4. Using the control panel
4.1. Remove the transparent protective foil
Before you use the control panel, remove the transparent protective foil.
4.2. General designations of symbols
SYMBOL DESIGNATION PROCEDURE
Enter the Temperature menu Tap
Check the current ignition/switch-off status Tap
Enter the Main menu Tap
Increase Tap or hold
Reduce Tap or hold
Enter the Timer menu Tap
Enter the Statistics menu Tap
Enter the Settings menu Tap
Enter the Tips menu Tap
ON
Hold
OFF
Hold
Set screen lock to HIGH Tap
Set screen lock to LOW Tap
Close menu Tap
Navigate back Tap
Previous sub-menu page (Ben, Percy light, Polly
light)
Tap
Next sub-menu page Tap
Next sub-menu page (Percy, Polly 2.0)
Information about the selected sub-menu Tap
Monitor/reset fuel autonomy Tap
ON --> Activate; OFF --> Deactivate Tap
Confirm Tap
! NOTE: Using low-quality pellets or other material damages the functions of your pellet
stove and can void the guarantee and the associated manufacturer's responsibility.
67 english
DELETE Delete Tap
SAVE Save Tap
FEED Start screw conveyor manually
Hold
Indicates which of the icons on the control panel
you have to tap or hold.
Table 13 - Designations of symbols
! NOTE: With Ben, Percy light and Polly light, you page through the menus to the left or to the right (
and ). However, with Percy and Polly 2.0 you page through the menus from the top to the bottom
(
).
4.3. Setting the date and time
You must set the correct time and date to be able to use the timer functions.
Tap the screen (if it is still in idle mode) to leave idle mode. If the display is not currently in idle mode, skip
this step.
“Time”
Set the Hours, Minutes and Day of the week by tapping and/or . Save your
setting by tapping
.
''Date''
Set the Day, Month and Year by tapping and/or . Save your setting by tapping
.
4.4. Setting the target temperature
A sensor on the back of the pellet stove measures the target temperature.
Tap the screen (if it is still in idle mode) to leave idle mode. If the display is not currently in idle mode, skip
this step.
The screen now shows the currently set ambient temperature (AIR temperature):
Change the target temperature by tapping and/or . The system saves the
changes immediately.
englisch
68


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Austroflamm Ben at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Austroflamm Ben in the language / languages: English, German, French as an attachment in your email.

The manual is 5,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Austroflamm Ben

Austroflamm Ben User Manual - Dutch - 23 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info