Manual Austria Email EWH serie (page 29 of 36) (English, German)

800549

Zoom out

Zoom in

1/36

In order to allow for a trouble-free repair, a removal or exchange of the device, it is necessary to establish the

connection of the tank by means of a detachable connection (Dutch). Tank leaks as a result of an improper connec-

tion and resulting damage and consequential damage are excluded from the warranty and product liability.

POWER CONNECTION

General Information

a) The electrical connection must principally be implemented from an expert in accordance with the circuit dia-

gram axed inside the connecting area of the tank!

b) Observe the correct supply voltage!

c) An all-pole disconnecting switch with a contact gap width of 3 mm must be provided in the power supply line.

Automatic safety cut-outs are also permissible as disconnecting switch devices.

d) The connecting cable must be inserted into the connecting area of the tank through the screwed cable connec-

tion and secured against pulling and twisting by means of the strain relief device.

e) The hot water tank must be isolated rst from all possible sources of electrical power in accordance with EN

50110 (ÖVE, TAEV) when being mounted and for interventions in the device. The system must be protected

against switching on again of the power supply prior to any additional works (unscrew fuses, trigger line circuit

breaker).

f) Caution: The lower cover is to be mounted with the nose bearing-mounted (wiring diagram inside) at the rear

and to be installed at the front with 2 screws!

Reconnection Options

In the case of storage tanks with optional heating times, reconnection of the heating rods is to be carried out

in accordance with the circuit diagram pasted to the device. Switching installed at the factory is in line with the

6-hour heating time in ~ 230 V connection voltage.

Reconnectable heating times and outputs at associated protection currents 16A.

Details in bold indicate switching undertaken at the factory (6 hours ~230 V)

Radiator connection*

Heating up time h

Heating times with mains voltage

~230V 3~400V 3N~400V

S+M

S+S

S+M+S

3 1/3

S+M+S in star

4 3 1/3 3 1/3

Tank capacity 50l kW 0,30 0,65 0,95 1,30 1,60 1,60

Tank capacity 80l kW 0,85 1,15 1,70 2,00 2,00

Tank capacity 100l kW 1,10 1,75 2,20 2,85 2,80 2,85

Tank capacity 120l kW 1,35 2,00 2,70 3,35 3,20 3,35

Tank capacity 150l kW 1,65 2,30 3,30 3,70 3,95

*S = side heating element in the ange

M = middle heating element in the ange

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Austria Email EWH serie in the language / languages: English, German as an attachment in your email.

The manual is 2.08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Austria Email EWH serie Manual

Product: