796313

Auriol 4-LD6162-1-2 - IAN 392071 Manual

18
Zoom out
Zoom in
Previous page
1/124
Next page
- 16 -
Press the SET button (25) to confirm the
setting.
Set
the position of D (day)/M (month) M
(month)/<->D (day), the month, the day, the
time zone 00 - (-)12, the hours, the minutes,
the 12-/24-hour time format in the same way,
the language of the weekday display
(ENG=English, FRE=French, GER=German,
SPA=Spanish, DUT=Dutch, DAN=Danish,
ITA=Italian, RUS=Russian) and the radio
reception ON/OFF.
Confirm your setting by pressing the SET
button (25). To return to the normal time
display.
Adjusting the time zone
If you are in a country where the current time
differs from the DCF77 radio signal, use the time
zone adjustment to use your device in a time zone
other than the standard-setting (UTC + 1 = Central
European Time).
Set the difference in hours (e.g., -01) to the
desired time zone.
Press the SET button (25) 1 x long and then 4
x short in normal time display. The time zone
flashes and can be set with the up button (26)
and the down button (27).
Press the SET button (25) to confirm the
setting.
Press the SET button (25) repeatedly until you
return to the normal time display.
12/24-hour time format
Press the down button (27) in the normal time
display. The 12- or 24-hour time format
flashes and can be adjusted with the up button
(26) and the down button (27).
In the 12-hour time format, the display shows
AM in the morning and PM in the afternoon.
Switch on/dim display illumination
For continuous display illumination, the plug-in
power supply must be connected to the hollow
plug socket (37) and to an external
power source.
Battery operation:
Press the SNOOZE/LIGHT button (8) to turn on
the display illumination for about 5 seconds.
Mains operation:
Press the SNOOZE/LIGHT button (8) to choose
between high, low or no display illumination.
Alarm
Setting the alarm
The device has 2 separately adjustable alarm
times.
In the normal time display, briefly press the
SET button(25) to select Alarm1
A1
A1A1
A1
or Alarm2
A2
A2A2
A2
.
When Alarm 1
A1
A1A1
A1
or Alarm 2
A2
A2A2
A2
is displayed,
press and hold the SET button (25) for
approx. 3 seconds to switch to the setting
mode.
The hours flash on the display.
Set the hours by pressing the up button (26)
and the down button (27).
Confirm the setting by pressing the SET button
(25).
Set the minutes in the same way.
Confirm your setting by pressing the SET
button (25). To return to the normal time
display.
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Auriol 4-LD6162-1-2 - IAN 392071 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Auriol 4-LD6162-1-2 - IAN 392071 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 2.2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info