796313
16
Zoom out
Zoom in
Previous page
1/124
Next page
- 14 -
Starting up the device
First insert the batteries into the batte
ry
compartment of the outdoor sensor
(46) and only then into the battery
compartment of the device (35).
Remove the protective film from the device
and the external sensor.
Open the battery compartment of the
outdoor sensor (46).
Insert the supplied batteries with the correct
polarity.
The control LED (47) lights up temporarily
and the outside temperature (48) and
outside humidity (40) are displayed.
Close the battery compartment (46).
Open the battery compartment of the device
(35).
Insert the supplied batteries with the correct
polarity.
The display is briefly displayed in its entirety.
A beep sounds and the room temperature
(11) and humidity (13) are displayed.
Close the battery compartment (35).
The display (1) is temporarily displayed in
its entirety, then the weather symbol flashes
briefly – slightly cloudy. As a result, the
radio waves of the outdoor sensor/channel
display (5) flash and the device
receives the data of the outdoor sensor. This
process can take a few minutes. If the
reception is successful, the selected channel
CH 1, 2 or 3 is displayed in the outdoor
sensor/channel display (5). The current
outside temperature (7) and the current
outside humidity (9) appear on the display.
After the external sensor has been
successfully received, the device will start
receiving the DCF77 radio signal and the
radio symbol (14) will flash on the
display. This process can take 3-10 minutes.
During reception, all buttons except the
SNOOZE/LIGHT button (8) and the radio
reception button (32) have no function and
the display lighting is temporarily switched
off. If reception of the time signal is
unsuccessful after 10 minutes, the radio
symbol (14) will go out.
Set the time manually (see "Basic settings").
The unit will receive the radio signal
between 01:00 and 03:00 and start a new
reception attempt at 04:00 and 05:00. The
time is corrected automatically after
successful signal reception.
Note: Please do not move the device or
the outdoor sensor during the reception
process.
If the reception is successful, the
radio symbol (14) appears
permanently and the correct time,
date and day of the week are automatically
set. During daylight saving time, the daylight
saving time display (15) appears on the
display.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Auriol 4-LD6162-1-2 - IAN 392071 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Auriol 4-LD6162-1-2 - IAN 392071 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 2.2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info