Manual Auerswald COMfortel 500 (page 24 of 40) (German)

538169

Zoom out

Zoom in

1/40

Commissioning the Telephone

Insert the plug of the connection cable

included in the package, as shown

below in Fig. 4, into the jack marked

with on the bottom of the

telephone.

2. Guide the cable to the outside through

one of the cable channels. See Fig. 4.

3. Turn the telephone around again.

4. Insert the other plug on the connection

cable into an analogue jack connected

to the PBX or in the analogue

connection jack provided by the

network provider.

Note: Within Germany, use the

accompanying RJ-11-TAE adapter.

Required Settings for Operating the

Auerswald PBX

The telephone can display the existing

information for an incoming call on the

display and save it in the caller list (CLIP).

This includes the telephone number and

name of the caller as well as the date and

time of the call.

Note: A name saved in the PBX

(for example, in the short-code

memory) is overridden by any

corresponding entries in the telephone

book on that telephone.

Note: The time saved in the telephone

is overwritten by the information

generated by a call.

In order for the telephone to easily detect

this information, it needs a defined call

signal that must be enabled for the

subscriber when operating an Auerswald

PBX.

Required Settings for the PBX

Configuration:

Internal telephone number on the

analogue port

Device type “analogue, DTMF

telephone”

CLIP info “Yes” or “Yes, also door

terminal number”

Extended CLIP info “activated”

Without CLIP delay block “activated”

Set Flash “100 ms”

Fig. 4: Connection

☞

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Auerswald COMfortel 500 in the language / languages: German as an attachment in your email.

The manual is 1,3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Auerswald COMfortel 500 Manual

Product: