538169

Auerswald COMfortel 500 Manual

23
Zoom out
Zoom in
Previous page
1/40
Next page
23
This section describes how to set up and connect the telephone. This includes the settings
required to put an Auerswald PBX into operation.
Connecting the Receiver
1.
Insert the plug, as shown below in
Fig. 3, the longer straight end of the
spiral cord into the jacked marked with
on the bottom of the telephone.
2. Guide the cable to the outside using
the corresponding cable channel. See
Fig. 3.
3. Insert the other end of the spiral cord
into the jack on the receiver.
Connecting the Headset
You have the option of connecting a
headset (not included in the delivery) to the
telephone using the information described
in Page 22.
1. Insert the plug, as shown below in
Fig. 3, into the jacked marked with
on the bottom of the telephone.
2. Guide the cable to the outside using
the corresponding cable channel. See
Fig. 3.
Situating the Telephone
Warning: Any liquid that penetrates
the casing can result in a life-
threatening electric shock or can
damage or destroy or the device.
Ǟ Only operate the telephone in closed,
dry rooms.
Attention: Mechanical stress and
electro-magnetic fields can result in the
damage or destruction of the device or
interfere in its function.
Ǟ Avoid mechanical stress (for example,
vibrations) and the proximity of
equipment that radiates electro-
magnetic fields (for example, amateur
radio sets, mobile phones, DECT
systems, WLAN routers, etc.).
Ǟ Protect the telephone from direct
sunlight, condensation, dirt, dust,
caustic liquids and steam.
Ǟ Note the ambient temperature value
range indicated in the technical data.
Ǟ Lay the connection cable in such as
way as to avoid accidental tripping.
1. Place the telephone on a clean, flat
surface.
Attention: Some plastics and paint
used on furniture may react chemically
with the plastic feet on the device and
cause them to soften. Plastic changed
in this way may cause damage to the
surface of your furniture.
Ǟ Place the telephone on a non-slip pad.
Preparation
Fig. 3: Assembly
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Auerswald COMfortel 500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Auerswald COMfortel 500 in the language / languages: German as an attachment in your email.

The manual is 1,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info