583761

Audiovox Pursuit Series PRO 800 Manual

3
Zoom out
Zoom in
Previous page
1/12
Next page
128-6844
3 of 12
The Triggered LED Indicates:
Whenever the system is armed and then triggered from either entry point or any
additional sensor device, the triggered LED will flash 15 times, and
the hand held transceiver will play a melody.
Note: Upon trigger, the hand held unit can be selected to vibrate, play
a melody, or both. See details below.
Two Way Transmitter Operation:
The two way transmitter depicted in this manual operates similar to any
transmitter with the exception that it will also indicate that the vehicle acted upon
the command issued.
Locking: Press and release the Lock Icon Button on the transmitter and the unit,
providing it is within range of the vehicle, will lock the vehicle doors and report
back that the command was acted upon by breifly turning on the Lock LED and
beeping once. This lock LED will flash 1 time every 10 seconds until the Unlock
command is issued.
Press and hold for lock button for three seconds causes the unit to go into the
panic mode. See panic mode referenced later on in this manual.
Unlocking: Press and release the Unlock Icon Button on the transmitter and the
unit, providing it is within range of the vehicle, will unlock the vehicle doors and
report back that the command was acted upon by breifly turning on the Unlock
LED and beeping twice. This unlock LED will flash 1 time every 10 seconds
until the lock command is issued.
Press and hold for unlock button for three seconds causes the unit to go into
the car finder mode. See panic mode referenced later on in this manual.
Operating The Trunk Release: When the Trunk transmitter button is operated
for three seconds, if the optional trunk release option is installed, the vehicle's
trunk will open. The Trunk LED will flash 4 times.
NOTE: Must Have Electric Trunk Release.
If this button is operated two times in succession, an optional alternate device
will be activated. Check with your installation to see if either or both these
optional features are installed, and how they are operated.
The Option Button: Press and release the OPT Button on the transmitter and
the unit, providing it is within range of the device it is controling, will operate the
device. This option button can be programmed into a number of Audiovox
accessories. If the accessory is a second two way Audiovox Remote Start Unit,
perhaps installed in a second vehicle, then the vehicle will act upon the
command but only the prime transmitter for that vehicle will indicate the com-
mand was acted upon.
Toggling Between Vibrate, Chirp, or Both Chirp & Vibrate:
The two way transmitter offers the option of having Beep Tones, Vibration, or
Both Beep Tones & Vibration associated with the function responses of the
transmitter.
To toggle between these modes, press simultaneously the "F" function button
and the Unlock Icon Button. The transmitter will beep, beep & vibrate, or vibrate
only toggeling on the specific preference.
3
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Audiovox Pursuit Series PRO 800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Audiovox Pursuit Series PRO 800 in the language / languages: English as an attachment in your email.

The manual is 0,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info