583761

Audiovox Pursuit Series PRO 800 Manual

2
Zoom out
Zoom in
Previous page
1/12
Next page
128-6844
2 of 12
YOUR “ Code Hopping “ TRANSMITTERS
The transmitters included with your new security system use the most advanced
and secure form of radio frequency transmission available on any current
automotive security system. Some of today’s sophisticated auto thieves use a
device known as a code grabber, which will receive and store the signal from your
keychain transmitter, and retransmit at a later time to disarm your system.
Your code hopping transmitters will change their signal every time the button is
pressed, so when a thief grabs then retransmits your signal, the alarm system
will not
respond.
If your transmitter button is pressed more than fifty times while it is out of range of
the vehicle ( children playing with your keys ), the transmitter will not operate when
you return to the vehicle and will need to be realigned to the receiver. To do this,
simply press the lock button two times within a one second time period. The
system will now respond to that transmitter each time a button is pressed.
NOTE: Your system has the option of using a siren, the vehicle horn, or both for
the sounding device. Where the siren is referenced below, the horn or
both may in fact chirp, or beep.
Your SYSTEM is also packaged with a two way confirming
transmitter shown Left which has Icon LED's to indicate the
function and status of your vehicle.
The top LED indicates:
a) Transmit,whenever a transmitter button is operated
this LED will turn on Green.
b) Out of range, when after pressing a transmitter button, if the
unit does not receive the command, this LED will turn on Red
and the transmitter will beep twice indicating the command
was not received or acted upon by the unit in the vehicle.
c) Low Battery, if when pressing any transmitter button, this
LED illuminates Red.
The Lock LED Indicates:
When the lock button on the transmitter is pressed and
the command is received and acted upon by the unit in
the vehicle, this LED will light Red and the transmitter will
beep once, then will continue flash once every 10 seconds so
you, at a glance, can determine the status of your vehicle or determine the state
it was last left in.
The Unlock LED Indicates:
When the unlock button on the transmitter is pressed and the command
is received and acted upon by the unit in the vehicle, this LED will light Red and
the transmitter will beep twice, then will continue flash once every 10 seconds
so you, at a glance, can determine the status of your vehicle or determine the
state it was last left in.
The Trunk LED Indicates:
When the Trunk transmitter button is operated for three seconds, if the
optional trunk release option is installed, the vehicle's trunk will open.
The Trunk LED will flash 4 times.
2
2 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Audiovox Pursuit Series PRO 800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Audiovox Pursuit Series PRO 800 in the language / languages: English as an attachment in your email.

The manual is 0,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info