618699
28
Zoom out
Zoom in
Previous page
1/32
Next page
VQT2R71
28
Troubleshooting guide
Troubleshooting and
other information
Before requesting service, make the following checks.
If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, consult your
dealer for instructions.
Troubleshooting guide
Problem Possible solution Pages
No power. Ensure the AC mains lead connected. 14
2CH SEARCH or 4CH
SEARCH does not go off
on the display while setting
the speakers.
Make sure that the speakers are on.
If the display does not go off even when the speakers are on, consult your
dealer.
15, 17
No sound or image after
playback starts.
Select the correct source.
Turn the muting off.
Check that the digital signals can be decoded by this system.
With the optical fibre connection, cannot playback PCM signal with sampling
frequency of over 96 kHz.
Check connections to other equipment.
(When the audio is not heard from TV) The optical fibre cable or stereo phono
cable is necessary to connect with a TV incompatible with ARC. For details,
refer to the operating instructions for the connected TV.
• Set AUTO in “Switching the input signal detection setting”.
Turn this system off then on again.
Make sure that the speakers are on.
Make sure that the speakers have been properly set.
Adjust the speakers.
If the connections are normal, this may be a cable-related problem. Use other
cables and make connections again.
18
22
29
10 to 13
10
26
15, 17
16
22, 23
The remote control does
not work.
Replace the batteries if they are worn.
Make sure the remote control code has been properly set.
8
26
No sound from microphone
connected to DVD player (karaoke)
.
No sound is output from microphone if this system is digitally connected with DVD player.
Change to analogue connection and input. Make analogue connection to AUX3 IN.
12, 13
There is no DTS audio output.
There is audio output, but the
DTS decoder indicator is not lit.
Set the DTS Digital Audio Output setting on the DVD player, Blu-ray Disc
player or DVD recorder to Bitstream.
• Set DTS in “Switching the input signal detection setting”.
26
Sound is not heard when
playing DVD audio.
This may occur due to digital copyright protection of the disc if using optical
digital connection. This system may not be able to play sources with sampling
frequency of over 48 kHz.
F70

appears on
the display.
(“DSP or HDMI is
displayed in
.)
Turn off the system, unplug the AC mains lead, and consult your dealer.
F76 appears on the display.
(After displayed, the system
turns off.)
Unplug the AC mains lead, and consult your dealer.
No sound in surround
mode.
Set to Dolby Virtual Speaker, Dolby Pro Logic or SFC.
(When the audio is not heard from TV) Check if this system is connected to TV
with the optical fibre cable or the stereo phono cable properly.
19
10 to 12
Cannot use Dolby Virtual
Speaker, Dolby Pro Logic
or SFC.
You cannot use these features with PCM signals with sampling frequency of
over 48 kHz. Make analogue connection to AUX3 IN.
You cannot use for Dolby Digital dual sounds.
12, 13
When using an HDMI
connection, the rst few
seconds of sound is cut off.
This may occur if you start play from a chapter on a DVD. The following will
correct the problem.
1 Change the audio output setting on the Blu-ray Disc player, DVD recorder or
DVD player from Bitstream to PCM .
2
Change input signal setting to “PCM ” in “Switching the input signal detection setting”.
26
The system does not work
properly.
The system does not work properly if you have connected the HDMI input and output terminals
incorrectly. Turn the system off, unplug the AC mains lead, and make the connection again.
10
Could watch TV (VIERA)
when installed, but now
cannot watch TV.
When using this system in combination with TV (VIERA) only, check if HDMI
cable is not connected to “BD/DVD IN” or “AUX1 IN” of this system. If it is
connected to “BD/DVD IN” or “AUX1 IN”, connect to “TO TV (ARC)”.
The sounds of the rst few
seconds are cut off when
playing back 7.1-channel
LPCM signals.
This may occur when playing back 7.1-channel LPCM signals of a Blu-ray
disc. Press [
u
SKIP] on the remote control of recorder or player to play back
again from the beginning.
HDMI Sound eld
Common problems
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Audiosonic SCZT2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Audiosonic SCZT2 in the language / languages: English as an attachment in your email.

The manual is 3,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Audiosonic SCZT2

Audiosonic SCZT2 User Manual - English - 40 pages

Audiosonic SCZT2 User Manual - German - 92 pages

Audiosonic SCZT2 User Manual - German - 40 pages

Audiosonic SCZT2 Installation Guide - German - 8 pages

Audiosonic SCZT2 User Manual - Dutch - 40 pages

Audiosonic SCZT2 User Manual - Dutch - 100 pages

Audiosonic SCZT2 Installation Guide - Dutch - 8 pages

Audiosonic SCZT2 User Manual - Danish - 40 pages

Audiosonic SCZT2 User Manual - Danish - 100 pages

Audiosonic SCZT2 Installation Guide - Danish - 8 pages

Audiosonic SCZT2 User Manual - French - 92 pages

Audiosonic SCZT2 User Manual - French - 40 pages

Audiosonic SCZT2 Installation Guide - French - 8 pages

Audiosonic SCZT2 User Manual - Italian - 92 pages

Audiosonic SCZT2 User Manual - Italian - 40 pages

Audiosonic SCZT2 Installation Guide - Italian - 8 pages

Audiosonic SCZT2 User Manual - Polish - 40 pages

Audiosonic SCZT2 User Manual - Polish - 100 pages

Audiosonic SCZT2 Installation Guide - Polish - 8 pages

Audiosonic SCZT2 User Manual - Swedish - 100 pages

Audiosonic SCZT2 Installation Guide - Swedish - 8 pages

Audiosonic SCZT2 User Manual - Spanish - 40 pages

Audiosonic SCZT2 User Manual - Spanish - 100 pages

Audiosonic SCZT2 Installation Guide - Spanish - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info