618699
29
Zoom out
Zoom in
Previous page
1/32
Next page
VQT2R71
29
Maintenance
Unplug the AC mains lead from the household mains socket and wipe the system using a soft and dry cloth.
When the system is very dirty, wring the cloth soaked in water thoroughly, wipe the dirt and wipe moisture off with a dry cloth.
Do not use solvents such as benzine, thinner, alcohol, etc. because they may cause casing to deform and coating to come off.
Before using chemically treated cloth, read the instructions that come with the cloth carefully.
Digital audio signals supported by this system
Dolby Digital
Blu-ray disc, DVD etc.
DTS
Blu-ray disc, DVD etc.
PCM (2-channel)
CD, DVD audio etc.
Multi-channel LPCM (Linear PCM)
Blu-ray disc, DVD audio etc.
This system supports 3D, x.v.Colour or
Deep Colour.
Troubleshooting guide/Digital audio signals supported by this system/Maintenance
With HDMI connection, this system can play back multi-channel LPCM signals
with sampling frequencies of over 48 kHz and PCM signals of over 96 kHz in
addition to multi-channel LPCM of up to 48 kHz and PCM of up to 96 kHz. (If
frequency exceeds these figures, playback equipment performs down-sampling
and plays back as 48 kHz signals. However, playback may be impossible
depending on the discs. See operating instructions of playback equipment for
more information.)
With the optical fibre connection, this system can play multi-channel LPCM
signals with sampling frequencies of up to 48 kHz and PCM signals of up to
96 kHz.
• See “Glossary” ( page 30) for more detailed information on each signal.
Note
Troubleshooting and
other information
Problem Possible solution Pages
VIERA Link
“HDAVI Control” does
not function properly.
Confirm “VIERA Link “HDAVI Control” setting” is set to ON ” (when the
operation is linked).
When it is OFF ”, change to “ON ”.
VIERA Link “HDAVI Control” does not function in standby condition (HDMI off mode)
when this system is turned off. See “Reducing standby power consumption (In standby
condition (HDMI off mode))” and set to “ON (normal power consumption).
Check VIERA Link “HDAVI Control” settings of the connected equipment.
VIERA Link “HDAVI Control” may not function when you change the
connections for HDMI equipment, insert and remove the outlet, or during
blackout. Do the following operations in this case.
Turn on the TV (VIERA) again while all the equipment connected with HDMI
cables is on.
Set “VIERA Link “HDAVI Control” (HDMI equipment control)” of TV (VIERA)
to “OFF” and then set to “ON” again. (For details, refer to the operating
instructions for TV (VIERA).)
Connect this system to TV (VIERA) using the HDMI cable, switch the TV (VIERA) on,
unplug this system’s AC mains lead, and insert it into a household mains socket.
25
24
Even if multi-channel audio
sources, such as DVD, Blu-
ray disc, are played back,
“ DIGITAL or “DTS” is not
displayed.
When using VIERA Link “HDAVI Control” and the speaker is set to “TV”, press
VIERA Link button on the remote control of TV (VIERA) and set the speaker to
“Home Cinema”.
20
This system’s input automatically
switches to AUX2 / STB ”, but
sound is not heard.
Or unexpected sound from other
equipment is heard.
After “Setting for automatically switching the input source to STB”, the
connection might have been changed. Select “OFF once and SET again.
11
[WIRELESS LINK]
indicator on the speakers
does not light green.
Sounds are interrupted.
When [WIRELESS LINK] indicator is off, check the connection of AC mains
lead of speaker and check the speaker is “ON”.
If [WIRELESS LINK] indicator does not change from red to green, the main unit and speaker are
not linked. Make sure that the main unit is “ON”. Or make the speaker setting again.
You may be using wireless headphones or the wireless LAN may be operating near this
system. These symptoms may be remedied by slightly moving this system’s position.
14,15,17
15,17
Sound stops.
(The indicator blinks red
and green alternately.)
The protection circuit is activated
when some abnormality is
detected, and turns off the
system automatically.
Amplifier output is abnormal.
Straining of the speakers through excessive volume or power.
This may occur if you use the system in an extremely hot environment.
Determine and correct the cause, then turn the system on.
(The protection circuit is reset.)
(Consult your dealer if the problem persists.)
HDMISpeakers
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Audiosonic SCZT2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Audiosonic SCZT2 in the language / languages: English as an attachment in your email.

The manual is 3,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Audiosonic SCZT2

Audiosonic SCZT2 User Manual - English - 40 pages

Audiosonic SCZT2 User Manual - German - 92 pages

Audiosonic SCZT2 User Manual - German - 40 pages

Audiosonic SCZT2 Installation Guide - German - 8 pages

Audiosonic SCZT2 User Manual - Dutch - 40 pages

Audiosonic SCZT2 User Manual - Dutch - 100 pages

Audiosonic SCZT2 Installation Guide - Dutch - 8 pages

Audiosonic SCZT2 User Manual - Danish - 40 pages

Audiosonic SCZT2 User Manual - Danish - 100 pages

Audiosonic SCZT2 Installation Guide - Danish - 8 pages

Audiosonic SCZT2 User Manual - French - 92 pages

Audiosonic SCZT2 User Manual - French - 40 pages

Audiosonic SCZT2 Installation Guide - French - 8 pages

Audiosonic SCZT2 User Manual - Italian - 92 pages

Audiosonic SCZT2 User Manual - Italian - 40 pages

Audiosonic SCZT2 Installation Guide - Italian - 8 pages

Audiosonic SCZT2 User Manual - Polish - 40 pages

Audiosonic SCZT2 User Manual - Polish - 100 pages

Audiosonic SCZT2 Installation Guide - Polish - 8 pages

Audiosonic SCZT2 User Manual - Swedish - 100 pages

Audiosonic SCZT2 Installation Guide - Swedish - 8 pages

Audiosonic SCZT2 User Manual - Spanish - 40 pages

Audiosonic SCZT2 User Manual - Spanish - 100 pages

Audiosonic SCZT2 Installation Guide - Spanish - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info