501325
46
Zoom out
Zoom in
Previous page
1/72
Next page
- Operation -
46
4.5 Dialling stored numbers from the phone book
After you have stored a few phone numbers, you can call these up very quickly and easily.
How you store numbers into the directory, is described in Chapter 5.1.
1. Press the phone book button . The display will now show the first number stored in
alphabetical order.
2. You can now select all of the stored numbers with the and buttons.
To choose a phone number directly alphabetically, press the appropriate letter.
3. Now press the call button and the telephone number displayed will be
automatically dialled.
4.6 Call duration display
The call duration in minutes and seconds is shown in the display during a call. Fifteen
seconds after dialling, the display will switch from showing the number dialled to showing
the duration of the call. The call duration will still be retained in the display for a few seconds
after the call has been ended.
4.7 Switching the handset on and off
You can switch off the handset by pressing and holding the button. If the handset is
switched off, no battery power will be used. It will not be possible to receive calls.
Press the
button once to switch the handset on again. The display will show the
message BASE 1 and the handset will switch on again after a short time. The handset will
switch itself on automatically as soon as you replace it on the base station.
4.8 Range information
The range of the handset is ca. 50 metres in closed rooms and ca. 300 metres outdoors.
When there is a good contact with the base station, the
symbol will come on in the
display.
If you are too far away from the base station, the
symbol will flash and you will hear
warning tones. In this case, move nearer to the base station once more, as otherwise the
call will be interrupted. These warning tones can be switched off as described in Chapter
8.8.
4.9 Muting the microphone in the handset
You can turn off the handset microphone during a call by using the button. It is thus
possible to speak without the other person hearing you. The loudspeaker in the handset
remains switched on and you can continue to hear the other person.
1. Press the button once during a call. The message MUTE will appear in the
display.
2. To switch the microphone on again, press the button once more. The MUTE
message will go off and you can continue the call as normal.
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Audioline DECT8048 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Audioline DECT8048 in the language / languages: English, German as an attachment in your email.

The manual is 1,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info