501325
45
Zoom out
Zoom in
Previous page
1/72
Next page
- Operation -
45
4.2 Receiving calls
When a call arrives, the ringing tone sounds on the handset and on the base station. The
handset will ring a little later than the base station due to the radio transmission. The
message EXT. will flash in the display. Press the call button
on the handset and the
connection will be made. The call indicator on the base station will flash during the call.
Note: While the handset is ringing, you can adjust the ringer volume by means of the
and
buttons.
To end the call, replace the handset in the base station or press the call button
on the
handset.
Notes: Please refer to Chapter 6 for information on how to show the caller's number in the
display. When the automatic call accept feature is selected, the call is automatically
accepted as soon as you lift the handset from the base station. You can find out in Chapter
8.5 how to switch the automatic call accept feature on or off.
4.3 Making calls
1. Enter the required telephone number with a maximum of 32 digits using the number
pad. As the display is only capable of showing 12 digits, in the case of longer phone
numbers only the last 12 digits are displayed.
Note: If you have entered a number incorrectly, you can delete the number by repeatedly
pressing the button. The number is completely deleted by pressing the button for
a long time.
2. Press the call button and the required connection will be made.
Note: You can also get a dialling tone by first pressing the call button
. On entering the
digits of your required phone number, your telephone will dial the number directly. With this
method of making a call, it is not possible to correct individual digits in the number in the
manner described above.
4.4 Handsfree facility
Press the button at the start of or during a call. You will now hear the dialling tone or
the person you are speaking to over the loudspeaker in the handset.
By pressing the handsfree button
repeatedly you can change over between normal
and handsfree mode during a call.
Always end calls made using the handsfree facility by pressing the call button
.
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Audioline DECT8048 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Audioline DECT8048 in the language / languages: English, German as an attachment in your email.

The manual is 1,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info