500989
19
Zoom out
Zoom in
Previous page
1/24
Next page
- Commissioning -
17
3.6 Private exchanges - Setting up for T-NET
You can use the “R” signal button on your telephone on private exchanges and when using
DEUTSCHE TELEKOM’s T-Net functions. If you use neither a private exchange or the T-NET-
functions of the DEUTSCHE TELEKOM, no adjustments must be made here.
Private exchanges
If you have connected your telephone to a private exchange, you can use all the facilities such
as call transfer, automatic recall, etc. The “R” signal button gives you access to these facilities.
The FLASH time “100ms” will be required on a private exchange. To make this setting, move
the slide switch R on the receiver inside to the “100ms” position. You can find out from the
dealer from whom the equipment was purchased whether your telephone will work on your
private exchange without any problems and which other facilities you will have access to.
T-NET functions
Your telephone supports the most important DEUTSCHE TELEKOM added value services
(e.g. brokering, call waiting, three-way conferencing, etc.). Please contact DEUTSCHE
TELEKOM to gain access to these functions (some of which are subject to charge). When
using T-NET functions, move the slide switch R on the receiver inside to the “300ms” position.
3.7 Wall mounting
Your telephone is also suitable for wall mounting. Use two screws for fixing. Drill two holes
vertically side by side, 100 mm apart, and leave the screws protruding from the wall by 5mm.
Now place the telephone over the screws and push it slightly downwards.
A
B
When the telephone is used on a table, the receiver hanging hook must be in the flush position
as shown in diagram A (factory setting). When mounting on the wall, the telephone receiver
hanging hook is pulled out and rotated. See diagram B.
If you are using the telephone fitted to the wall, you can hang the receiver on the telephone
without hanging up. You will find a small hook for this purpose at the upper end of the receiver
rest.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Audioline Cow Phone at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Audioline Cow Phone in the language / languages: English, German as an attachment in your email.

The manual is 0,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info