500989
21
Zoom out
Zoom in
Previous page
1/24
Next page
- Using T-NET / Private exchanges -
19
5 Using T-NET / Private exchanges
You can use the “R” signal button on your telephone on private exchanges and when using
DEUTSCHE TELEKOM’s T-Net functions.
5.1 “R” Button on private exchanges
If you have connected your telephone to a private exchange, you can use all the facilities such
as call transfer, automatic recall, etc. The “R” signal button gives you access to these facilities.
The FLASH time “100ms” will be required on a private exchange. For this purpose, set the “R”
switch to the “100ms” setting. You can find out from the dealer from whom the equipment was
purchased whether your telephone will work on your private exchange without any problems
and what further facilities you will receive from this.
5.2 “R” Button and the DEUTSCHE TELEKOM T-NET functions
Your telephone supports the most important DEUTSCHE TELEKOM added value functions
(e.g. brokering, call waiting, three-way conference, etc.). The T-NET works using the "FLASH
300ms" setting. For this purpose, set the “R” switch to the “300ms” setting. Please contact
DEUTSCHE TELEKOM to gain access to the T-NET functions (some of which are subject to
charge).
5.3 Dialling and storing telephone numbers when using on private
exchanges
Note! The pause function between the code for the outside line (usually 0 or 9) and the
dialling tone described in this chapter is only necessary on older private exchanges.
With some private exchanges, there is a short pause between the code for the outside line
(usually 0 or 9) and the dialling tone. This pause can be entered when dialling manually and
when dialling from the phone book so that the following numbers are not dialled too quickly.
Entering the pause when dialling manually
Press the redial button
once between the code for the outside line and the actual
telephone number. After an outside line has been obtained, you telephone will wait for 3
seconds before dialling the actual telephone number.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Audioline Cow Phone at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Audioline Cow Phone in the language / languages: English, German as an attachment in your email.

The manual is 0,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info