501272

Audioline CDL 971G Manual

28
Zoom out
Zoom in
Previous page
1/40
Next page
28
3. OPERATION
3. OPERATION
3.1 THE DISPLAY SYMBOLS
The display shows all important functions using different symbols.
Symbol on: the connection to the base station is broken and you cannot hear a signal tone. No
calls can be made.
Lit: A call is being made.
Flashing: A call is coming in and the connection to the base station is being established.
Flashing: The batteries are flat. Please charge the handset.
Lit: The handset is being charged on the base station.
Flashing: The connection to the base station is being established.
Lit: The handset is in a programming mode.
Flashing: the handset microphone has been muted.
In order to preserve battery power and thus extend the stand-by time, no indication appears in the display
when the handset is off the hook.
3.2 RECEIVING CALLS
When a call comes in, the call tone sounds on the handset. The display flashes . Lift the handset from
the base station or press the call button . The base station call display flashes during the call. To
terminate the call, replace the handset on the base station or press the call button on the handset.
In order to hear incoming calls loudly and clearly, put down the handset with the display downwards. If you
only want to receive incoming calls with a soft call tone, put down the handset with the display uppermost.
3.3 MAKING CALLS
1. Enter the required telephone number with a maximum of 24 digits using the keypad. The keys pressed
will be shown in the display. As the display can only show 12 digits, with longer telephone numbers only
the last 12 digits are shown.
Note: If you have entered a wrong number, you can delete the telephone number by repeatedly
pressing the key .
2. Press the call button and the required connection will be made.
Note: You can also get a dialling tone by first pressing the call button. On entering the digits of your
required telephone number, your AUDIOLINE CDL971G dials the number directly. With this method
of making a call, it is not possible to correct individual digits in the manner described above.
… 28 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Audioline CDL 971G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Audioline CDL 971G in the language / languages: English, German as an attachment in your email.

The manual is 0,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info