The AUDIOLINE Telephone BIGTEL 48 can be used like any conventional
telephone.
PLEASE FOLLOW THE INSTRUCTIONS:
1.Lift the receiver and wait until you hear the dialling tone.
2.Now dial the required telephone number. The number dialled will be
shown in the display. The display shows a telephone number with a
maximum of 16 digits. If the number dialled is longer, only the last 16
digits will be displayed.
3.To end the call simply replace the receiver.
4.2 Receiving calls
As soon as you receive a call you will hear the ringing tone and the visual
call indicator will come on at each ring.
The call can now be accepted by lifting the receiver.
4.3 Increasing the volume of the receiver
If the caller’s voice should ever be too quiet, you can increase the volume
of the receiver.
Simply press the
ab
button during the call.
Note: The changed volume setting is not saved and must be increased
again for the next call if required.
4.4 Redial
If a connection that you have dialled is engaged or you were unable to get
through to anybody, simply replace the receiver. The last number dialled
remains stored in the telephone automatically.
To use the redial facility, proceed as follows:
1.Lift the receiver and press the redial button
d. The stored redial
number will now be dialled.
4.5 Call duration display
After dialling the telephone number, the current call duration in minutes
and seconds will be shown in the display after a few seconds.
You can also use the internal clock as a stopwatch. To do this, press the
f button with the receiver on the hook or even during a call. The time
measurement can be stopped using the same button f. The measured
time will still be shown in the display for a few seconds and the display
then jumps back to showing the present time.
4.6Adjustable ringing tone
By means of the "Ringer" slide switch on the right−hand side of your tele-
phone you can choose the settings "SOFT" (
i), or "LOUD" to match the
volume of the ringing tone to your requirements. If at any time you do not
want to be disturbed, use the "OFF" setting.
4.7 Storing direct and speed dial numbers
You can store a telephone number for direct dialling on each of the buttons
M1, M2 and M3 with your AUDIOLINE Telephone BIGTEL 48. The direct
dial button M1, M2 and M3 are coloured red and suitable for use as emer-
gency call buttons. An additional ten important numbers can be stored as
speed dial numbers.
PLEASE FOLLOW THE INSTRUCTIONS:
1.Lift the receiver.
2.Press the store button c.
3.Now enter the required telephone number using the number pad. The
maximum length is 16 digits.
4.Press the store button
c again.
5.Now press the required direct dial button M1, M2 or M3 or a button on
the number pad between 1 to 9 or 0 to save the telephone number as
a speed dial number.
6.Replace the receiver.
Service−Hotline Germany: Tel. 0180 5 001388, cost via German landline at time of going to print: 14 ct/min., different costs possible via mobile telephone systems
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Audioline BIGTEL 48 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Audioline BIGTEL 48 in the language / languages: English, German as an attachment in your email.
The manual is 0,45 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
