After unpacking your telephone, you must first connect the telephone re-
ceiver to the base unit. The spiral cable needed for this has two identical
connections so that there can be no confusion. First take one end of the
spiral cable and plug it into the socket at the bottom of the receiver. Now
plug the other end into the socket on the left−hand side of the base unit.
3.2Insert battery
Before connecting your new telephone to the telephone network, the sup-
plied battery should be installed. Please always use type AAA 1.5V alka-
line batteries. The batteries are required for the display and other features
of the telephone. Before installing or changing the batteries make sure that
the telephone is not connected to the telephone network. The battery com-
partment is to be found on the underside of your telephone.
1.Open the battery compartment with a small screwdriver or a pointed
object.
2.Insert the battery. Ensure that the polarity is correct. Push the "−" pole
onto the small spring and then press the "+" pole downwards.
3.Close the battery compartment.
The battery must be changed when the display is no longer visible.
3.3Connecting the telephone
Connect the telephone cable provided to the telephone jack and the tele-
phone socket on the rear of the telephone. The AUDIOLINE Telephone
BIGTEL 48 works using the TTD system (Touch−Tone Dialling).
3.4Wall mounting
Your AUDIOLINE Telephone BIGTEL 48 is also suitable for wall mounting.
Use the two screws for fixing it to the wall. Drill two holes 83 mm apart and
leave the screws protruding 5 mm from the wall. Now place the telephone
over the screws and push down slightly.
Abb. A
Abb. B
When the telephone is used on a table, the receiver hanging hook must be
in the flush position as shown in diagram A (factory setting). When moun-
ting on the wall, the telephone receiver hanging hook is pulled out and ro-
tated. See diagram B.
3.5 Hearing aid compatible
The telephone has a special circuit working on the basis of induction for
transmitting speech to hearing aids. Please set your hearing aid to "T".
Service−Hotline Germany: Tel. 0180 5 001388, cost via German landline at time of going to print: 14 ct/min., different costs possible via mobile telephone systems
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Audioline BIGTEL 48 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Audioline BIGTEL 48 in the language / languages: English, German as an attachment in your email.
The manual is 0,45 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
