810507

ATTACK Pellet 30 Automatic Plus Manual

47
Zoom out
Zoom in
Previous page
1/60
Next page
45
BACKUP BOILER CONECTION
The controller can control the operation of the backup boiler (gas or oil). In this case, it is
not necessary to switch this boiler on or off manually. The backup boiler will be switched
on in case the temperature of the pellet boiler drops below the set temperature in the
service menu. The backup boiler is switched off when the pellet boiler reaches the required
temperature. Connection to a backup - e.g. gas boiler must be performed by a qualified
technician in accordance with the technical documentation of this boiler. The backup
boiler must be connected to terminals 46-47 via a relay.
Example of a system diagram for connecting a backup boiler to the controller, 1 -
controller, 2 - backup boiler (gas or oil), 3 - relays RM 84-2012-35-1006 and base GZT80
RELPOL.
To enable backup boiler control, set H outputs for backup boiler control in the menu:
Service settings ĺ Output H ĺ Backup boiler
ĺ Boiler settings ĺ Replacement boiler
To additionally enable backup boiler control, you must set the Backup boiler shutdown
temperature parameter to a value other than zero. The switch-off of the backup boiler
control follows the setting of the zero value of the switch-off of this parameter.
The control output for the backup boiler is also shared with the alarm
output. Disabling the backup boiler control will cause the output to be
controlled by the alarm module.
If the pellet boiler is in operation and its temperature exceeds the set value - e.g. 25 ° C, the
controller switches off the backup boiler (supply voltage 12V at terminals 46-47). This will
power the relay coil and open the contacts. When the boiler temperature falls below the
set value of the backup boiler switch-off, the controller stops supplying voltage to
terminals 46-47, which switches on the backup boiler.
… 47 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATTACK Pellet 30 Automatic Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATTACK Pellet 30 Automatic Plus in the language / languages: English as an attachment in your email.

The manual is 0.97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ATTACK Pellet 30 Automatic Plus

ATTACK Pellet 30 Automatic Plus User Manual - German - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info