810499

ATTACK DPX Manual

36
Zoom out
Zoom in
Previous page
1/92
Next page
36
4.14 CANCELLATION OF THE PRODUCER´S FUNCTION
For this procedure you need the code from producer. It is possible to set the operating hours of
the boiler, number of overheating states and the last 10 burnings to 0.
Enter and exit from the appropriate submenu is the same as it is given in the chapter 8.1. If no
button is pressed within 1 minute, the regulator automatically switches to the operating mode.
Option Submenu Indication
Information
Test of device
Safety test
Setting Code
---
Enter the c
ode from producer by the „+“ button.
The random number is displayed on the right
side. Change it to the code from producer and
confirm by the button „ĸ“. The next setting is
displayed.
Cancel
NO/YES
Select „YES“ by the „+“
button.After pressing the
„ĸ“ button is the explanation of the setting
displayed and the menu is closed.
By selecting „YES“ you can set the boiler
operating hours and the total excessive
temperature, the last 10 burnings are set to 0.
33: Output reduction
NO/YES
Select „YES“ by the „+“ button. After pressing the
„ĸ“ button is the explanation of the setting
displayed and the menu is closed.
By selecting „YES“, the boiler output is reduced
by 20 % is the boiler temperature exceeds the
adjusted temperature for 2K.
End
Testing
The test of device and safety test have to be done by the presence of the technician!
Test of device
The test of device can be done only when the boiler is turned off!
The test can be done, only when there is no danger of overheating!
The test is selected and done by the menu button „ĸ“ (enter into the menu of Options). In the
next menu there is a „test of device“ found by the „–“ button and the confirmed by the button
„ĸ“. The appropriate step of the test is activated by the „+“ button and deactivated by the „–“
button. The next step is selected by the „ĸ“ button.
The test of device is completed after the last point of the test by the „ĸ“ button and the display is
automatically switched to the operating mode. The test can be interrupted by pressing the
buttons „+“ and „–“ at once.
If no button is pressed within 15 minutes, the display is automatically switched to the operating
mode.
… 36 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATTACK DPX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATTACK DPX in the language / languages: English as an attachment in your email.

The manual is 11.03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ATTACK DPX

ATTACK DPX Additional guide - English - 21 pages

ATTACK DPX Additional guide - German - 21 pages

ATTACK DPX User Manual - German - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info