810499
30
Zoom out
Zoom in
Previous page
1/92
Next page
30
3.13 TECHNICAL SPECIFICATION OF THE REGULATOR
Power supply 230V + 10%, 50Hz
Input (not including the ventilator and pumps) < 4VA
Range of measuring the boiler temperature –9 – 109 °C+ 1 °C
Range of measuring the flue gas temperature –30–500 °C+ 1 °C
Max. input of devices connected to the regulator 2A/230V
CAUTION: not to get injured by the electrical current, do not remove the cover of device
before disconnecting it from electricity mains!
4 TECHNICAL DESCRIPTION OF THE ATTACK DPX LAMBDA
4.1 REGULATION OF BURNING
The boiler output is regulated according to the flue gas temperature by the air inlets to the
particular oxygen value. The flue gas temperature for burning down is adjusted. If there is a lot of
fuel (totally full feeding chamber) and the boiler temperature achieves 90 °C (overheating), the
flue gas fan is stopped, flap for primary air is closed and flap for secondary air is open for 25 %.
When the boiler temperature decreases to less than 88.5 °C, the flap for secondary air is for 30
seconds open for 100 % (chimney cleaning) and the primary air flap is regulated according to the
requirement for the flue gas temperature.
Automatic boiler stop: After the fuel burns out, the boiler can be stopped automatically or by
setting the flue gas temperature (TAG) or by a setting the value for oxygen (optional function).
Boiler stop by setting the flue gas temperature: When the fuel burns out and the flue gas
temperature decreases to less than 25 % of the adjusted value, the boiler stops after 15 minutes.
This is recommended only when the big or wet wood logs are being used.
Stop by the oxygen value: If the boiler works for more than 45 minutes and the oxygen value
exceeds 14 % for more than 15 minutes, then the boiler stops. This should be a standard function,
when the boiler cooling by chimney is limited. Ignition with remaining coal is easier and there is
less smoke by heating up.
When the boiler stops, the flue gas fan is stopped, the primary air flap is closed, the secondary air
flap remains open for 25 % until the flue gas temperature decreases below 100 °C.
Automatic restart after the power shortage: After the power shortage, the secondary air flap is
open for 100°%for 30 seconds to let the chimney clean.
Overheating (boiler temperature above 90 °C):The secondary air flap remains open for at least
25 %.
After turning the boiler off (automatically or manually):The primary air flap V1 is closed (0°%),
the flue gas temperature is above 100 °C, the secondary air flap remains open for at least 25 %
and function of the automatic operation is inactive.
4.2 IGNITING AND REFILLING THE FUEL
Basic instructions:
Check the pressure (and level of water) in the heating system before igniting.
The fuel has to be prepared in the boiler.
Ignite the fuel (see the prescriptions for boiler operation) and the rest of fuel in the
feeding chamber
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATTACK DPX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATTACK DPX in the language / languages: English as an attachment in your email.

The manual is 11.03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of ATTACK DPX

ATTACK DPX Additional guide - English - 21 pages

ATTACK DPX Additional guide - German - 21 pages

ATTACK DPX User Manual - German - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info