810510
49
Zoom out
Zoom in
Previous page
1/100
Next page
48
EN
Step 4: Combustion
The combustion phase runs, until it is interrupted by the thermo-
stat.
Step 5: Burn–out
The thermostat interrupted the combustion phase and the burner
begins the phase of burning–out.
Step 6: Cleaning
The grate moves out and when it is out completely, the fan runs at
full rotations, until the grate moves back.
Step 7 Ash removing
Gear of ash removing is started after determined period (e.g. 6
hours) and it works within the stated time (e.g. within 3 min).
Step 8: Return into standby mode.
9.5.2 MENU INDICATIONS
The burner is in the standby mode.
Press the”S” button.
Here you can change the burner output. Level 1 = 15 kW, 2 = 32
kW, 3 = 50 kW.
The range and the levels of output are adjustable in the advanced
menu.
Press the ”+” button.
Here you can set the pellet amount to be supplied. It is not neces-
sary, if the correct pellet weight was set in the Pellet dosing in the
service menu.
Press the ”+”button.
If you wish to clean the burner or to interrupt the operation from
other reasons, press the „S“ button, and the burn–down mode
begins. To restart the burner after ash removing, press the „S“
button.
Press the ”+”button.
This internal setting can be helpful by troubleshooting, if the
burner stops and the alarm is activated. The last 10 different error
codes are recorded. For more information about the error codes,
see the „Troubleshooting“.
COMBUST. ??KW
ON FC: ? %
FINAL–COMBUST.
OFF FC: ? %
SCRAPING
OFF FC: 0 %
STOKERTIME
OFF FC: 0 %
PAUSE
OFF FC: 0 %
PAUS.
OFF FC: 0 %
EFFECT LEVEL
ENTER EXIT
PELLET–TRIM
ENTER EXIT
FINAL–COMBUST
ENTER EXIT
LOG
ENTER EXIT
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATTACK DPX Combi Pellet at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATTACK DPX Combi Pellet in the language / languages: English as an attachment in your email.

The manual is 8.73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info