810510
48
Zoom out
Zoom in
Previous page
1/100
Next page
47
EN
9.5 MENU AND FUNCTIONS
Functions of the burner are set via the menu buttons under the display. (see also options of set-
tings under the Production settings, below).
How to change settings of the pellet burner:
„S“ – Menu/Enter: For activation of furtherrecords
and ENTER/SAVE of the changes.
„−“: For comeback in menu and reduction of the ad-
justable values.
„+“: For advance in menu and increasing of adjustable
values.
„ESC“– Exit/Escape: For exit from menu without sav-
ing the new values.
Values that can be set by the user are given in the following schedule:
9.5.1 INDICATIONS ON DISPLAY
Standby mode
Nothing in the burner is started, burner waits for the signal from
thermostat to start.
Temperature sensor or thermostat starts.
Step 1: Test blow–through
The fan starts to operate and when the photocell recognizes the
value (%), the program continues.
Step 2: Fuel ration for heating up
The fuel ration for heating up is supplied into the burner and pro-
gram waits for the „fire“ signal from photocell.
Step 3: Transition phase
The transition phase begins, when the photocell and the control
system recognize the fire. Small, gradually increased amounts of
pellets are feeded into the burner, until the required pellet ration
is achieved.
MENU Explanation
EFFECT ADJ. Required output degree (1, 2 or 3)
PELLET–TRIM Setting of the pellet ration supplied
LOG Record of faults for control purposes
FINAL COMBUST. Instruction to burner for burn–out
MENU/ ADVANCED Access into service menu via code
PAUS.
OFF FC: 0 %
TEST BLOWING
ON FC: ? %
IGNITION 1
ON FC: ? %
TRANS. PHASE ??kW
ON FC: ? %
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATTACK DPX Combi Pellet at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATTACK DPX Combi Pellet in the language / languages: English as an attachment in your email.

The manual is 8.73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info