810510
44
Zoom out
Zoom in
Previous page
1/100
Next page
43
EN
9.1 ATTACK PELLET BURNER AUTOMATIC 8–30 KW
The burner is set in production to the output range of 14 – 30 kW and three degrees of output:
1 (14 kW), 2 (22 kW) and 3 (30 kW). The selected output degree is dipslayed during the operation.
It is possible to set the output via the menu buttons of the burner and the information on dis-
play. The range of output can be changed in two levels – from 8 to 12 kW and from 14 to 30 kW –
according to this there are three degrees of output from 8 to 12 kW or from 14 to 30 kW in the
advanced menu.
Basic description of the
burner:
1 – combustion chamber
2 – air chamber
3 – ventilator
4 – tube of fuel inlet
5 – main electronics
6 – display with control panel
7 – gear of grate cleaning
8 – electrical heting coil
9 – cover
10 – photocell
The burner is formed by pellets combustion chamber, air chamber with ventilator and control
units with the gear of grate cleaning. The burner is designed for end user with the most comfort,
cleaning aspect and total spent time with the boiler. The base of the burner is combustion
chamber, which is made from welded high quality stainless steel with a thickness of 3 mm,
which guarantees long lifetime.
The cover of the burner presented burner design. Surface conditioning of cover is realized with
dust technology.
The burner is delivered in a paper box filled with polysthyrene to improve stability. If the box is
damaged, check the burner for possible damage by transport. Claim of the damage by transport
has to be registered by a spediteur.
The paper box ought contain the following items:
1 pc. ATTACK PELLET BURNER Automatic 8–30 kW
1 pc. plug of upper loading chamber
1 pc. inlet tube with emergency thermostat of back–burning
1 pc. pantograph
1 pc. burner door
Note: Boiler temperature sensor for burner has been by factory installed in the boiler. This sensor needs
to be connected to the connector of burner electronics, signed TS2, after burner installation.
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATTACK DPX Combi Pellet at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATTACK DPX Combi Pellet in the language / languages: English as an attachment in your email.

The manual is 8.73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info