769373
39
Zoom out
Zoom in
Previous page
1/67
Next page
Atomos Ninja V – User Manual Edition 1: Aug 2021 37
PROJECT RATE OUTPUT MONITOR OUT MODE AUDIO SOURCE TIMECODE MEDIA LIVE BUTTON
PROJ: Displays the Project Rate, which is determined by the resolution
and frame rate of the Primary Input.
OUT: Displays the active video resolution and frame rate being output from
the CAST Out and the CAST USB-C connectors on AtomX CAST.
MON OUT: The output mode of the Ninja V HDMI Out connector. This can
be selected in the Output and Switcher menu pages, and can be set to:
Program, Preview or Multiview.
AUDIO: Displays the audio source that you selected in the Audio menu
page. When HDMI Input is selected, the chosen input will be displayed,
eg. Input 1. Where Mic/Line has been selected, MIC/LIN will be displayed
and AFV will be displayed where Audio Follows Video has been selected.
TC: Displays Timecode.
MEDIA: Displays the remaining recording time on your media, based on
the chosen codec and remaining capacity of the drive.
LIVE: The Live button allows you to enable or disable the live stream
output. It is important to note that the LIVE button must be pressed to
allow your program feed to be output to your streaming software and/or
connected Program display via the CAST USB-C and CAST HDMI outputs.
AconnecteddisplayinProgrammodecanbeusedtoconrmthatyou
are outputting a stream to your audience, as well as what they are seeing.
This output will not have an image until you are live. Tapping the button will
cycle between red for enabled, and greyed out when disabled.
If a Primary Input has not been selected, the Live button cannot be
enabled.
BORDERS: The borders around the inputs indicate the status of each
input. When selected as the program output, the border around that input
will be red. A green border indicates that the input is being previewed in
Two Touch switching mode.
INPUT NUMBERS: The input numbers in the center of the screen indicate
the status of each input. They will be white when there is a valid input, and
greyed out when there is no input. When selected as the program output,
the input number will be red. The input number will be green when the
input is being previewed in Two Touch switching mode.
INPUT NUMBERSBORDERS
8. Using the AtomX CAST
AtomX CAST
The AtomX CAST is a modular expansion for the Ninja V, that connects to
the AtomXpansion port to convert the Ninja V into a fully functional
stand-alone video switcher with 4 x 1080p HDMI inputs, a multiview
monitor and broadcast quality recorder, with graphic overlays, picture in
picture functionality and a streaming output.
When using AtomX CAST, the Information Bar at the top of the Ninja V
screen displays information and settings for your project rate, outputs,
audio settings and more. Touching any of these areas will take you to the
relevantmenu.TouseAtomXCASTwithyourNinjaV,rmwareversion
10.71 or later needs to be installed.
Main Screen
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Atomos NinjaV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Atomos NinjaV in the language / languages: English as an attachment in your email.

The manual is 29.33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Atomos NinjaV

Atomos NinjaV User Manual - German - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info