769373
33
Zoom out
Zoom in
Previous page
1/67
Next page
Atomos Ninja V – User Manual Edition 1: Aug 2021 31
Multiple Ninja V units can be added to the timcode network. Simply
repeat this process on each unit.
For connected Client units, the timecode source should be set to
AtomX Sync on the Timecode page.
TIMECODE SYNC
Thispageallowsyoutodeneanetworkrole
for each Ninja on the network as either Server
or Client, so that Client units can connect to the
timecode network created by the Server unit. It
also allows you to add other devices like audio
recorders to the network via Bluetooth.
Network Role
Tap to cycle between the options to set the
network role for the Ninja as either Server or Client.
The ‘Server’ unit will then provide the timecode
source for all ‘Client’ units on the network.
For any other Ninja that you want to sync with,
‘Client’ should be selected as the Network Role on
it’sSyncCongpage.ThisallowstheClientunits
to connect to the timecode network created by the
Server unit.
Start Network
OnceyouhavenishedsettingupyourServer
unit, tap Start Network to toggle the Sync network
on and off. Note that on Client units you will have a
Join Network switch instead of Start Network.
Join Network
When this setting is ‘on’, the client unit will connect
to the Sync Network created by the Server unit.
Tap to toggle on and off.
RF Channel
Use the ‘-’ and ‘+’ to select an RF channel
between 1-12. Changing the RF channel can
help in situations where you are experiencing
interference from other devices. Ensure that the
RF channel on any Client units is set to the same
RF channel as the Server unit.
7. Using the Ninja V
Record Control
When this setting is enabled, tapping record on the Server Unit Ninja V
will cause any other Ninja V or GoPro on the network to start recording as
well.
Network FPS
On Client units, Network FPS will be displayed and the frame rate will
match the frame rate of the server unit.
Signal
Provides information on the signal strength.
Network ID
Provides information on the Network.
Region
Taptocyclethroughtheoptionsuntilyoundyourregionandtap
‘conrm’toacceptthenewregionor‘cancel’.
Set Timecode
Press the Set Timecode button to open the Sync Network Timecode
page.
Input
Tap to cycle through ‘Time of Day’, ‘Manual’ and ‘Input’. Select ‘INPUT’
and tap ‘Set Timecode’.
Set Device Name
Tap to change the name of your Ninja V unit. For more information refer to
‘b. Unit Name’ in ‘Using the Ninja V - Best Practice’
BLUETOOTH
You can pair with up to six Bluetooth devices, like an iPhone or a Zoom
F6 audio recorder, so that they can connect to the timecode network. A
numericalgurewillindicatetheamountofFreePairsthatareavailable
for Bluetooth pairing. By connecting an Atomos Ultra Sync Blue to the
timecode network, you can pair it with Bluetooth devices that are much
further away from the AtomX SYNC module. For more information, see
www.atomos.com/accessories
Pair
Follow the manufacturers instructions to set up each device for pairing,
then Tap Pair to connect to the device. Once paired, the device will be
listed in the ‘Sync Network’ menu page, along with the other connected
Ninja V’s and other devices.
Unpair All
Tap to unpair all devices that are connected to the timecode network.
Sync Config Sync Cong
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Atomos NinjaV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Atomos NinjaV in the language / languages: English as an attachment in your email.

The manual is 29.33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Atomos NinjaV

Atomos NinjaV User Manual - German - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info