553036
62
Zoom out
Zoom in
Previous page
1/69
Next page
62
Prior to using your system or understanding how to configure for timecode control,
here are some very important tips you should know about --
If you are going to use Timecode Vinyl - Verify that your turntable is well grounded
If you are going to use Timecode CDs - Never activate the Master Tempo on your CD
player because it will destroy the timecode signal
If you hear the timecode sound in your speakers, you have to mute the pre-listen of
Lines In (monitor)
A quality Input signal from the Turntables and/or CD Player is important to having
quality timecode control. Be sure that the input gain is correctly adjusted in your sound
card. To LOW or HIGH of a signal will not be able to be read and will lead to poor
control.
Configuring Timecodes
When you open the Timecode Configuration window, you can choose to view the window in
Simple or Advanced view. For the most part, you might never have to go into the Advanced
View – the Simple View shows the most essential timecode configuration that you will probably
need.
You will notice that there is an Auto-
Config button for each virtual deck. This
button can be used to automatically
detect the required timecode settings for
the software to function properly.
To use the Auto-config feature:
1. Play both timecode input sources
(i.e. play both timecode CDs or play
both timecode records).
2. Press each deck’s Auto-Config
button to automatically configure the
timecode settings.
If the timecode signal is configured properly,
you will see a green dot next to Timecode
Quality Or as shown to the right in Advanced
View, you should see a nice Sine wave
pattern.
TIMECODE CONTROL
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Atomix Virtual DJ 5.1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Atomix Virtual DJ 5.1 in the language / languages: English as an attachment in your email.

The manual is 1,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info