580238
3
Zoom out
Zoom in
Previous page
1/8
Next page
2
SPECIFICATIONS
Magnification ............................................................. 2X
FOV............................................................................17°
Range of focus ........................................................... 10 m to infinity
Reticle ........................................................................
Red On Green
Windage & elevation adjustments ............................. 1/2MOA
IR illuminator ............................................................. Digital 450mW (detachable)
Power Supply ................................................................. One 1.5V AA size battery
Battery life .................................................................. 30 hours
Operating Temperature .............................................
-40°C to +50°C
Storage Temperature ................................................. -50°C to +70°C
Dimensions ................................................................ 225 x 103 x 93mm/8.9 x 4.1 x 3.7”
Weight ........................................................................1.1kg / 2.4 l b
Diopter adjustment .................................................... +6/-4
PREPARATION FOR OPERATION
Before getting started make sure to follow these steps:
• Install the battery into its housing with the polarity order shown on the main body of the unit.
• Switch on the scope with the protective lens cover still
attached to the lens.
• Make sure that the green luminance of the light inten-
sifier tube is present.
• Observe the scene, and adjust the diopter and/or lens
for optimal image clarity.
• You may now enter a dark environment or simply shut
the lights off in order to darken the room.
• Next, remove the lens cap/daylight filter.
• Finally, you may want to turn the infra red (IR) illuminator on. Notice the ability of the scope to
see in total darkness with the aid of the IR illuminator.
OPERATING
MOUNTING
1. Slightly loosen the fixing screws on the 7/8” weaver mount built into the scope.
2. Place the scope on the weaver rail of the fire arm.
3. Tighten the fixing screws.
NOTE: Fixing screws may need to be tightened after continuous shooting.
MOUNTING SYSTEM
The ATN Night Vision Riflescopes Mounting System allows to change the position of the rif-
lescope flexibly on the weapon in relation to a shooter in combination with the fixed positions
already available on the weaver rail. For this purpose in the base of the mounting bracket there
is a rail with a fixing projection. There are two grooves in the mounting bracket for mounting
this rail. Besides it is possible to change the position of the riflescope additionally by 1/3 of
inch. For doing this one needs to about-face the rail.
* ATN reserves the right to change the above specifications at any time without notice
Battery
installation
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for ATN Night Arrow 2 - 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of ATN Night Arrow 2 - 2 in the language / languages: English as an attachment in your email.

The manual is 0,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info