810412
57
Zoom out
Zoom in
Previous page
1/66
Next page
Operation and Maintenance Manual - EN
EN
www.atmos.cz EN-57
If no problem has been found, reset the regulation AC07X by the RESTART command.
If the system is working, but you are not satisfied with its function, proceed as follows:
Check the quality of pellets
Heating value - whether they are really pellets made of wood or whether something has been
added to them - crumble them and smell
Colour - caking - white pellets do not cake, dark pellets or pellets with dark dots that contain bark
cake.
If the pneumatic cleaning does not manage to clean the burner combustion chamber sufficiently,
shorten the times defined by parameters S42 and S43. When the two hour time span for cleaning is
not sufficient, the pellets contain impurities that make it impossible to burn these pellets in a A85
burner (biological waste). Must be replaced.
Dust in pellets - causes uneven operation of the burner and clogging of the burner hose
Size - too small pellets - reduce the burner power (Ø 5 x 5 mm), long pellets do not fall freely to
the burner and clog the supply pipe.
Check the flue gas temperature
It should be in the optimal range (130 ÷ 220 °С).
If the temperature is too low, reduce the power of the burner (decrease parameter T4 and increase
T6) and reduce the quantity of combustion air or clean the boiler.
If the temperature is too low, increase the power of the burner and quantity of combustion air
(increase parameter T4).
Check the level of pellets in the burner mouth
If it is too low and the burner goes out, check the flue gas temperature (see above). Reduce the
quantity of combustion air or increase the quantity of supplied pellets - increase the power (increase
parameter T4).
If the pellet level in the burner mouth is too high and the burner exhibits poor combustion - produces
smoke, increase the quantity of combustion air or reduce the quantity of supplied pellets - reduce the
power (decrease parameter T4).
At the start check how long it takes for combustion quality to improve - how long smoke is released
from the chimney
If smoke is released from the chimney at the start for more than 5 minutes, extend the time of
gradual increase to the nominal power (parameter T10, e.g. increase by 5min). Be careful about
the setting of the air flap.
The burner regularly does not ignite at the first attempt, but always at the second one
Extend the time for the supply of ignition fuel (parameter T1 e.g. by 10 s), extend time T2 for
ignition of pellets (e.g. to 15 minutes) or reduce the angle of the conveyor (max. 45°).
If after stopping of the burner and its burning out a lot of glowing unburnt pellets remain in the
combustion chamber (mouth) of the burner
Extend the rundown time of the fan - parameter T5 (e.g. extend the time by 5 minutes) - never shorten
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Atmos A85 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Atmos A85 in the language / languages: English as an attachment in your email.

The manual is 2.45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Atmos A85

Atmos A85 User Manual - German - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info