810413
5
Zoom out
Zoom in
Previous page
1/72
Next page
Operation and Maintenance Manual - EN
EN
www.atmos.cz EN-5
2. Design
Description
Heating with pellets with the use of the ATMOS A25 pellet burner has a lot in common with
natural gas or oil heating. However, there is a difference that burning of pellets produces a certain
quantity of ashes that must be removed from the burner and boiler in an interval to avoid impairment
of efficiency or affecting the functionality of the burner.
The ATMOS A25 pellet burner is supplied with automatic fuel ignition as standard. The assembly
of the burner, external conveyor and fuel bin work completely automatically during operation and
is controlled by an electronic control unit with the use of a flame sensor (photocell). In the burner
body the fuel and combustion air are supplied in such a way to ensure maximum efficiency and
environment-friendliness of fuel burning.
Only high-quality pellets with the diameter of 6 to 8 mm and length of 5 to 25 mm should be fed
into the burner. Pellets made of soft wood without bark, called white pellets, are considered as
high quality pellets.
Ashes are normally removed from the burner through the open door once every 7 to 30 days as
necessary. It is recommended to thoroughly clean the inner parts of the burner once a year; for this
operation the burner should be removed from the boiler. For ideal cleaning of the combustion chamber
(pot) of the burner you can use a special vacuum cleaner or a poker.
The burner consists of the following parts:
CAUTION - For the A25 burner DA1500 external shaftless conveyors with the length of
1,5 m, DA2000 conveyors with the length of 2 m, DA2500 conveyors with the length of 2,5 m,
DA3000 conveyors with the length of 3 m and the DA4000 conveyor with the length of 4
m, all with the diameter of 75 mm, are designed. If you use another conveyor with a higher
power, e.g. DRA with the length of 4 or 5 m, you must reduce the power of the conveyor with
the T4 and T6 parameters (T4 - reduce, T6 - increase).
1 - End switch
2 - Safety thermostat 95 °C
3 - Display of the electronic unit of
the burner
4 - Combustion chamber (mouth) of
the burner
5 - Socket for the external conveyor
6 - connector for additional cable (R3 and R4)
7 - connector for interconnection cable between the
boiler and the burner (power cable)
8 - connector for connection of TS, TV, TK and TSV
sensors
3
6 5
2
4
1
7 8
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Atmos A25SP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Atmos A25SP in the language / languages: English as an attachment in your email.

The manual is 4.12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info