Manual Atika Profi 145 S (page 13 of 96) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

519917

Zoom out

Zoom in

1/96

To preserve the value of the mixer and increase its service

life, handle it as described in "Transport and storage".

Furthermore, the concrete mixer should be checked regularly

for signs of wear and tear or functional deficiencies. This

applies especially to moving parts, screw connections,

protective devices and electrical parts.

Guarantee

* We undertake a 2 year guarantee, starting from ex-stock

delivery of the equipment by the dealer. This warranty

covers faults which are caused by defective materials or

production.

* The dated invoice counts as evidence for guarantee

claims.

Repair

* Warranty claims, even during the warranty period, will not

be accepted for damages due to incorrect handling or

inadequate packaging during return of the devices or to a

non-observance of the operating instructions.

Pull plug each time before doing

repair work.

* We shall attend to any necessary warranty work. Our

express approval is required if another company is

intended to eliminate the damage.

• Switch off machine and pull plug if repair work should be

necessary. Do not start machine during repair work.

• Protective devices removed for repairs must be properly

remounted before starting the machine.

* The guarantee does not cover normal wear to bevel gear,

ring gear segments, driving belt, ball-bearing, mixing

drum, impellers, as well as the respectively associated

fasteners

• Only the manufacturer or companies authorised by the

manufacturer may perform repair work on electrical parts

or on parts which affect the space needed to mount

electrical equipment.

* Defective parts must be sent to our plant carriage paid or

postage paid. We reserve the right to decide whether to

provide spare parts free of charge.

• Use only unaltered original spare parts. Otherwise, the

manufacturer will assume no liability.

* The guarantee only applies if original spare parts are

used.

* We reserve the right to make alterations on the grounds

of technical advances.

Equipment failures

Malfunction Possible cause Remedy

Motor does not start up

⇒ no mains voltage

⇒ defective cable

⇒ check fuse protection

⇒ have checked or replaced (electrician)

⇒ thermostat is triggered « reason:

- motor overload

- motor not getting enough air owing to

clogged ventilation apertures

⇒ allow motor to cool and then find and

eliminate whatever caused the thermostat to

respond

Motor hums but does not

start up

⇒ blocked crown gear

⇒ defective condenser

⇒ switch off machine, pull plug and clean or

replace the crown gear segments

⇒ send machine to manufacturer or a company

designated by the manufacturer for repairs

Machine starts up, but

becomes blocked at low

load and may switch off

automatically

⇒ extension cord is too long or its cross-section

is too small

⇒ socket is too far from mains connection and

the connecting wire's cross section is too

small

⇒ extension cord must be at least 1.5 mm² for a

maximum length of 25 m; the cross-section

of longer cables must be at least 2.5 mm²

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Atika Profi 145 S in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,13 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Atika Profi 145 S Manual

Product: