519917

Atika Profi 145 S Manual

12
Zoom out
Zoom in
Previous page
1/96
Next page
rotate the mixing drum up to the appropriate
recess for the material you are mixing.
 allow rotating mechanism to lock into place.
Concrete mixer with brake
Hold handwheel tightly while rotating.
Step on the brake
Rotate the mixing drum up
to the marking appropriate
for the material you are
mixing
 release brake
Additional safety instructions.
• Only fill or empty the mixing drum when the motor is
running.
• Check the stability of the mixer.
Preparing material for mixing:
1. Pour in water and few shovels full of aggregate (sand,
gravel, ...).
2. Add a few shovels full of binding agent (cement, lye, ...).
3. Repeat steps 1 and 2 until you reach the proportions
required for mixing.
4. Allow material to mix thoroughly.
Have a professional advise you regarding the
composition and quality of the material being mixed.
Emptying the mixing drum:
Hold the rotating lever or handwheel tightly
1. Unlock rotating mechanism or step on brake
2. Slowly tilt mixing drum
Mortar
Transport
Concrete
Pull plug each time before transport.
• Point the opening of the mixing drum downwards during
transport or storage.
Bearings
Storage
• In order to increase the service life of the concrete mixer
and operate it without glitches, the rotating mechanism
should be treated with an environmentally compatible
spray oil before the mixer is put into storage for unusually
long periods.
Cleaning
Additional safety instructions
Pull plug each time before cleaning.
• Switch off machine and pull plug if you have to touch the
machine (with hand, brush, scraper, rag, etc.) while
cleaning it.
• Protective devices removed for cleaning must be
properly remounted before starting the machine.
• Do not spray water directly on the motor or the switch,
nor on the ventilation apertures in the motor housing.
Notes on cleaning:
• Before taking a break and after finishing work, clean the
concrete mixer inside and out.
• Do not pound on the mixing drum with hard objects
(hammer, shovel, etc.). A dented mixing drum impairs
mixing operations and is difficult to clean, besides.
• To clean the inside of the drum, put in some water and a
few shovels full of gravel and set the drum to revolving.
• Remove any concrete or mortar left sticking to the teeth
of the axle-drive bevel gear or the crown gear segments
immediately.
Maintenance
The concrete mixer requires practically no maintenance.
The mixing drum and drive shaft are bedded on ball bearings
with permanent lubrication.
Never grease the ring gear!
10
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Atika Profi 145 S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Atika Profi 145 S in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info