520146

Atika KSG220A Manual

13
Zoom out
Zoom in
Previous page
1/108
Next page
12
L
Keep these safety instructions in a safe place.
Make yourself familiar with the equipment before using it,
by reading and understanding the operating instructions.
Do not use the machine for unsuitable purposes (see
“Normal intended use”).
Mount the machine on a non-skid and level ground.
Avoid abnormal posture. Ensure that you have stand in a
secure standing position and maintain your balance at all
times.
Be attentive. Be careful what you do. Behave sensibly
when working. Do not use the device when you are tired or
under the influence of drugs, alcohol or medicaments. One
moment of carelessness when using the device can result
in serious injuries.
Wear suitable work clothes!
− do not wear loose-fitting clothes or jewellery; they can
catch in moving parts.
− Gloves and slip-proof shoes
− wear a hair-net if your hair is long
Wear protective clothing:
− safety goggles
− ear protection (Sound intensity level at workplace can
exceed 85 dB (A))
− dust mask
Keep your workplace in an orderly condition! Untidiness
can result in accidents.
Take into consideration environmental influences:
− Do not use the device in moist or wet ambience.
− Do not expose the chain sharpener to rain.
− Do only work with sufficient visibility conditions. Provide
for good illumination.
Never leave the operational machine unattended.
Persons under the age of 18 must not operate the device.
Keep other persons away.
Do not allow other persons, especially children, to touch
the tool or cable.
Keep them away from your working area.
Do not overload the machine! You work better and safer in
the given performance range.
Only operate the machine with complete and correctly
attached safety equipment and do not alter anything on
the machine that could impair the safety.
Do not use any grinding wheels which do not comply with
the indicated characteristics of this instruction manual.
The use of other tools and other accessories may
present a risk of injury to you.
Worn and defective grinding wheels (cracks, imbalance,
chipping, etc.) must be replaced immediately.
Ensure a firm seat of the grinding wheel.
Switch the machine off and remove the mains plug from
the socket when
− carrying out repair works
− maintenance and cleaning
− Elimination of failures (including freeing a blocked
grinding wheel)
− Storage
− Leaving the chain sharpener (even in case of short-
term interruptions)
Caution! Grinding wheel runs after! Do not brake the
grinding wheel by hand or using lateral pressure.
Maintain your chain sharpener with care:
− Keep the device free of oil and grease.
− Follow the maintenance instructions and the
instructions for tool exchange.
Check the machine for possible damage:
− Before continuing to use the machine, the protective
devices must be inspected to ensure that they work
perfectly and with their intended function.
− Check whether the movable parts function perfectly
and do not stick or whether the parts are damaged. All
parts must be properly mounted and all conditions met
to ensure the flawless operation of the chain sharpener.
− Unless otherwise indicated in the operating instructions,
damaged safety devices and parts must be properly
repaired or replaced by an authorised workshop (or by
the manufacturer).
− Damaged or illegible safety warning labels should be
replaced immediately.
Do not allow any tool key to be plugged in!
Before switching on, check always that wrenches and
adjusting tools are removed.
Store unused equipment in a dry, locked place out of the
reach of children.
Electrical safety
Design of the connection cable according to IEC 60245
(H 07 RN-F) with a core cross-profile section of at least
- 1.5 mm² for cable lengths up to 25 m
Long and thin connection lines result in a potential drop.
The motor does not reach any longer its maximal power;
the function of the device is reduced.
Plugs and coupler outlets on connection cables must be
made of rubber, non-rigid PVC or other thermoplastic
material of same mechanical stability or be covered with
this material.
The connector of the connection cable must be splash-
proof.
When running the connection line observe that it does not
interfere, is not squeezed, bended and the plug connection
does not get wet.
Wind off completely the cable when using a cable drum.
Do not use the cable for purposes for which it is not meant.
Protect the cable against heat, oil and sharp edges. Do
not use the cable to pull the plug from the socket.
Protect yourself against electric shocks. Avoid touching
earthed parts with your body (e.g. pipes, heating
apparatus, cookers, fridges etc.).
Regularly check the extension cables and replace them if
they are damaged.
Do not use any defective connection cables.
Do not set up any provisional electrical connections.
Never bypass protective devices or deactivate them.
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Atika KSG220A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Atika KSG220A in the language / languages: English, German, Dutch, French, Italian, Polish, Swedish, Finnish as an attachment in your email.

The manual is 2,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info