520146
11
Zoom out
Zoom in
Previous page
1/108
Next page
10
Do not operate machine before having read the
operating instructions, understood all the notes
and assembly the machine as described here.
Keep the instructions in a safe place for future use.
Contents
EC Declaration of conformity 10
Characteristic noise values 10
Vibrations 10
Extent of delivery 10
Symbols machine /operating instructions 11
Proper use 11
Residual risks 11
Safety instructions 11
Preparing for commissioning 13
Commissioning 13
Working instructions 13
Working with the chain sharpener 14
Maintenance and care 14
Storage 15
Technical data 15
Description of device / spare parts 15
Guarantee 15
Possible faults 15
EC Declaration of Conformity
according to EC Directive 2006/42/EC
We,
ATIKA GmbH & Co. KG
Schinkelstraße 97, 59227, Ahlen - Germany
herewith declare under our sole responsibility that the product
Sägekettenschärfer (Chain sharpener) KSG 220 A
Serial number: see last page
is conform with the above mentioned EC directives as well as
with the provisions of the guidelines below:
2004/108/EG und 2006/95/EG.
Following harmonized standards have been applied:
EN 61029-1:2009; EN 61029-1:2000+A11:2003+A12:2003;
EN 55014-1:2006+A1:2009;
EN 55014-2:1997+A1:2001+A2:2008;
EN 61000-3-3:2008; EN 61000-3-2:2006+A1:2009+A2:2009
Keeping of technical documents at:
ATIKA GmbH & Co. KG – Technical department
Schinkelstr. 97 – 59227 Ahlen – Germany
Ahlen, 10.05.2010 A. Pollmeier, Geschäftsleitung
Characteristic noise values
DIN EN ISO 3744; 11/95, DIN EN 11201
Application of the machine as chain sharpener with standard
grinding wheel.
Noise power level Sound pressure level at the workplace
L
WA
= 91 dB (A) L
PA
= 78 dB (A)
The values given are emission values and must therefore not
simultaneously represent safe workplace values too. Although
there is a relationship between emission and immersion levels, it
can be reliably deduced whether additional precautionary
measures are necessary or not. Factors, which can influence the
immersion level currently existing at the workplace include the
duration of the effects, the special type of the workroom, other
noise sources, etc. e.g. the number of machines and other
adjacent processes. The permissible workplace values can also
vary from country to country. This information should however
enable an improved assessment of the danger and risk to be
carried out.
Vibrations
Vibration level: = 3.52 m/s²
Measuring uncertainty: K=1.5
The indicated vibration emission level has been measured
according to a standardised test method and can be used to
compare power tools.
It can also be used for an initial estimate of exposure.
Warning!
The vibration emission level can differ from the indicated value
during actual use of the power tool depending on the manner of
usage.
It is necessary to define safety measures to protect the operator
that are based on an estimate of exposure at the actual
conditions of usage (for this, all parts of the operation cycle have
to be considered, e.g. times during which the power tool is cut off
and times during which it is switched on but runs in no-load
mode).
Extent of delivery
Chain sharpener KSG 220 A 1 pair of carbon brushes
Rotary table, complete Mounting nut
Chain stop 1 operating manual
After unpacking, check the contents of the box
! That it is complete
! Check for possible transport damage
Report any damage or missing items to your dealer, supplier
or the manufacturer immediately. Complaints made at a later
date will not be acknowledged.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Atika KSG220A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Atika KSG220A in the language / languages: English, German, Dutch, French, Italian, Polish, Swedish, Finnish as an attachment in your email.

The manual is 2,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info