520784
20
Zoom out
Zoom in
Previous page
1/141
Next page
19
Storage
Remove the mains plug from the socket.
Store unused equipment in a dry, locked place out of the reach of children.
Before extended storage, please observe the following to increase the service life of the device and to ensure smooth operation:
thoroughly clean the saw
treat all movable parts with an environmentally friendly oil
L
Never use any grease!
Guarantee
Please observe the enclosed terms of guarantee.
Possible faults
Before each fault clearance
Switch off device
Wait for standstill of the saw blade
Pull out power plug
After each fault clearance, put into operation and recheck all security installations.
Fault Possible cause Removal
Machine fails to start after
switching on or switches off
during idle running
Power failure
Extension cable defect
Motor or switch defect
Check safety fuse
Check cable, no longer use defect cable
Have motor or switch checked by an ap-
proved electrician or replaced by original
spare parts
No crosscut function
Transport locking pin not removed
Pull out transport locking pin (5)
Machine stops while cutting
Saw blade is dull
Feed is too great
Replace saw blade (16)
Allow motor to cool and proceed working
with less pressure
Burned spots at the cut areas
Saw blade is not suitable for the work step or is dull
Replace saw blade
Saw vibrates
Saw blade is warped
Saw blade not properly mounted
Replace saw blade
Mount saw blade properly
Chip outlet is clogged
No exhaust system connected
Exhaust power too weak
Switch off saw, remove chips and connect
exhaust system
Switch off saw, remove chips and in-
crease exhaust power (air velocity 20
m/sec at chip exhaust neck.
Rotary table moves hard
Chips under rotary table
Remove chips
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Atika KGS210N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Atika KGS210N in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 2,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info