Manual Atika HA710-61 (page 18 of 104) (English, German, Dutch, French, Italian, Polish)

520132

Zoom out

Zoom in

1/104

Do not use any device where the switch can not be

switched on and off. Damaged switches must be repaired

or replaced immediately by the customer service.

The hedge shears has a two-hand protective shut-down which

prevents an unintended switching on.

Push the circuit closer/breaker on the rear handhold (7)

and operate at the same time with the other hand the switch

button on the front handhold (5).

Switching off

For switching off the device release the circuit closer/breaker or

the switch button.

Adjustments on the hedge trimmer

Turn handhold (Type HA 620/55; HA 710/61)

The handhold can be set to 5 working positions (45° raster)

Â During the setting the circuit closer/breaker on the rear

handhold (7) can not be operated.

Hold the hedge shear on the front handhold (5).

Â Push the switch (11) backwards.

Â The rear handhold (7) can be turned into the desired

position.

Â Release the switch (11) and make sure that it engages. The

handhold is fixed.

Working instructions

You may not start to operate the machine until

you have read these operating instructions,

observed all the instructions given and installed

the machine as described!

Observe all safety instructions in any case.

Before commencing work, ensure the following:

 Workplace tidied?

 You may not start to operate the machine until you have

read these operating instructions, observed all the

instructions given and installed the machine as described!

 Always keep the ventilation apertures free.

 Scare animals off the hedge before starting to cut in order to

prevent them from being injured.

Â Best time for hedge trimming:

⇒ Leaved hedge: June and October

⇒

Conifer hedge: April and August

⇒ Quickly growing hedge: from May and then every 6

weeks

Working with the hedge trimmer

Hold the hedge trimmer with both hands on a safe

distance from the body.

Â The extension cable must be kept behind the hedge

trimmer when cutting so that it cannot be caught by the

knives.

Due to its double sided knives the hedge trimmer can

be guided forward and backward or by oscillating

movements from one to another side?

At first cut the sides of the hedge and then the upper

edge.

Cut the hedge from the bottom up.

Â Cut the hedge in trapezium shape.

Â Stretch a guide over the complete length of the hedge when

you want to shorten the upper edge of the hedge evenly.

Â Remove unconditionally any foreign objects out of the

hedge (e.g. wires) as these can damage the knives of the

hedge trimmer.

Maintenance and Care

Remove the plug from the power socket

before starting any maintenance or

cleaning work.

Maintenance and repair work other than those described in this

chapter is only allowed to be carried out by service staff.

For maintaining and cleaning, removed security devices must

unconditionally be mounted properly and proved again.

Use only original parts. Other parts can result in unexpected

damages and injuries.

Maintenance

The cutting tool will not come to a standstill immediately after

cut-off. Before starting any service work wait until all parts are

stationary.

To guarantee a long and reliable usage of the product carry out

the following maintenance works regularly.

Check the machine for obvious defects such as

− loose, hung out or damaged cutting tools

− worn or damaged components

− correct assembly and faultless covers and protective

devices.

Necessary repair works or maintenance have to be carried

out before using the power tool.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Atika HA710-61 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 2,36 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Atika HA710-61 Manual

Product: