520132

Atika HA710-61 Manual

17
Zoom out
Zoom in
Previous page
1/104
Next page
17
• This device is not intended to be used by persons (including
children) with restricted physical, sensory or mental abilities
or a lack of experience and/or know-how unless they are
supervised by a person responsible for their safety or they
have been instructed by such a person on the use of the
device.
Supervise children to make sure they do not play with the
device.
Safe working
• Do not modify the device or parts of the device respectively.
• The operator is responsible to third persons within the area
of operations.
• Adhere to national regulations that might specify an age limit
for the user of the unit.
• Stop the hedge trimmer when moving to another work place.
• Always hold the hedge trimmer with both hands - one hand
on the front handle and the other on the rear handle.
• Make sure that you can step back safely without hindrances.
• Before trimming, remove all foreign objects (e.g. stones,
branches, wires, etc.). While working watch out for further
foreign objects.
• Be sure that the cutting tool already moves before you start
cutting.
• Caution! The cutting tool stops delayed after the machine is
switched off. Do not try to slow down the cutting tool by the
hand.
• After a longer period of use, accessible metallic parts and
accessories may be hot.
• Turn off the machine, remove the battery and wait until the
cutting tool is stationary when
− the cutting tool comes into contact with soil, stones, nails
or other foreign objects (B check whether the cutting
tool/machine is damaged)
− removal of faults (including blocking of knives)Leaving
the machine (also during temporary interruption)
• Maintain your hedge trimmer with care:
− Before each starting of the machine the safety devices
must be checked carefully for their proper and intended
function. Do not modify things on the machine that could
impair its safety.
− Damaged or illegible safety warning labels should be
replaced immediately.
Repairs to other parts of the machine must be carried out
by the manufacturer or one of his customer service
points.
Use only original spare parts, accessories and special
accessory parts. Accidents can arise for the user through
the use of other spare parts. The manufacturer is not
liable for any damage or injury resulting from such action.
Description / Spare parts
Pos. Denomination Order-No.
1/
Knife
2
Knife protection HA 500/51
Knife protection HA 620/55
Knife protection HA 710/61
364196
164197
364198
3
Hand guard (HA 500/51)
Hand guard (HA 620/55, HA 710/61)
364193
364194
4
Safety label
364190
5
Front handhold with switch button
364199
6
Ventilation slots
7
Rear handhold with ON- OFF switch
8
Cable with power plug
9
Cover strip
10
Impact protection
11
Switch for the angular motion of the
rear handhold
Assembly
 Attach the hand guard (3) with screws to the device
prior to startup.
Commissioning
Mains connection
Compare the voltage given on the machine model plate e.g.
230 V with the mains voltage and connect the hedge trimmer to
the relevant and properly earthed plug.
L
Alternating current motor:
Use a shockproof plug, mains voltage 230 V with
residual current circuit breaker 30 mA and 10 A fuses.
Use connection cable or extension cable respectively with a
cross section of at least 1.5 mm².
Mounting of the extension cable
 In order to prevent an unintended loosening of the
connection assembly put the extension cable as noose
through the opening on the rear handhold (7) and put it over
the cable mounting.
Switch on
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Atika HA710-61 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Atika HA710-61 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 2,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info