520130
19
Zoom out
Zoom in
Previous page
1/104
Next page
19
Cleaning
L
Clean the machine and its accessories thoroughly after
each application so that the faultless function is kept.
 Clean the case with a soft brush or a dry cloth.
Water, solvents and polishing agents shall not be
applied.
 Clean the cutting device on a regular basis using a brush or
a cloth.
L Never clean the knives with water
Î Risk of corrosion!
L Oil the cutting tools regularly. Never use any grease
Use environmentally friendly oil.
 Keep handles dry and free of oils and grease.
Storage
Remove the mains plug from the socket.
Store unused equipment in a dry, locked place out of the
reach of children.
To extend the service life of the hedge trimmer and
guarantee smooth operation, before storing for a longer
period
thoroughly clean the hedge trimmer
treat all movable parts with an environmentally friendly
oil
L
Never use any grease!
Push the knife protection on the knife.
Guarantee
Please observe the enclosed terms of guarantee.
Possible faults
Fault Possible cause Removal (disconnect power plug)
Hedge trimmer does not work.
No power
Power failure
Extension cable defect
Safety fuse defect
Motor or switch defect
Check cable, no longer use defect cable
protection
Check cable, no longer use defect cable
protection
Check power supply, power outlet, fuse
Replace fuse
Have motor or switch checked by an
approved electrician or replaced by original
spare parts
Hedge trimmer cuts with
interruptions
Cable defect
Internal failure
Circuit closer/breaker defect
Check cable, no longer use defect cable
protection
Manufacturer or responsible customer
service respectively must be called
Manufacturer or responsible customer
service respectively must be called
Motor is running, knives do not
move
Internal failure
Manufacturer or responsible customer
service respectively must be called
Knives get hot
Knives are edgeless
Knives are defect
Missing lubrication => friction
Arrange sharpening of knives
Exchange knives
Lubricating of knives
Motor is humming, knives do not
move
Knives are blocking Remove object
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Atika HA500-51 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Atika HA500-51 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 2,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info