Manual Atika HA500-51 (page 17 of 104) (English, German, Dutch, French, Italian, Polish)

520130

Zoom out

Zoom in

1/104

• This device is not intended to be used by persons (including

children) with restricted physical, sensory or mental abilities

or a lack of experience and/or know-how unless they are

supervised by a person responsible for their safety or they

have been instructed by such a person on the use of the

device.

Supervise children to make sure they do not play with the

device.

Safe working

• Do not modify the device or parts of the device respectively.

• The operator is responsible to third persons within the area

of operations.

• Adhere to national regulations that might specify an age limit

for the user of the unit.

• Stop the hedge trimmer when moving to another work place.

• Always hold the hedge trimmer with both hands - one hand

on the front handle and the other on the rear handle.

• Make sure that you can step back safely without hindrances.

• Before trimming, remove all foreign objects (e.g. stones,

branches, wires, etc.). While working watch out for further

foreign objects.

• Be sure that the cutting tool already moves before you start

cutting.

• Caution! The cutting tool stops delayed after the machine is

switched off. Do not try to slow down the cutting tool by the

hand.

• After a longer period of use, accessible metallic parts and

accessories may be hot.

• Turn off the machine, remove the battery and wait until the

cutting tool is stationary when

− the cutting tool comes into contact with soil, stones, nails

or other foreign objects (B check whether the cutting

tool/machine is damaged)

− removal of faults (including blocking of knives)Leaving

the machine (also during temporary interruption)

• Maintain your hedge trimmer with care:

− Before each starting of the machine the safety devices

must be checked carefully for their proper and intended

function. Do not modify things on the machine that could

impair its safety.

− Damaged or illegible safety warning labels should be

replaced immediately.

Repairs to other parts of the machine must be carried out

by the manufacturer or one of his customer service

points.

Use only original spare parts, accessories and special

accessory parts. Accidents can arise for the user through

the use of other spare parts. The manufacturer is not

liable for any damage or injury resulting from such action.

Description / Spare parts

Pos. Denomination Order-No.

Knife

Knife protection HA 500/51

Knife protection HA 620/55

Knife protection HA 710/61

364196

164197

364198

Hand guard (HA 500/51)

Hand guard (HA 620/55, HA 710/61)

364193

364194

Safety label

364190

Front handhold with switch button

364199

Ventilation slots

Rear handhold with ON- OFF switch

Cable with power plug

Cover strip

Impact protection

Switch for the angular motion of the

rear handhold

Assembly

Â Attach the hand guard (3) with screws to the device

prior to startup.

Commissioning

Mains connection

Compare the voltage given on the machine model plate e.g.

230 V with the mains voltage and connect the hedge trimmer to

the relevant and properly earthed plug.

Alternating current motor:

Use a shockproof plug, mains voltage 230 V with

residual current circuit breaker 30 mA and 10 A fuses.

 Use connection cable or extension cable respectively with a

cross section of at least 1.5 mm².

Mounting of the extension cable

Â In order to prevent an unintended loosening of the

connection assembly put the extension cable as noose

through the opening on the rear handhold (7) and put it over

the cable mounting.

Switch on

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Atika HA500-51 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 2,36 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Atika HA500-51 Manual

Product: