520796
14
Zoom out
Zoom in
Previous page
1/80
Next page
14
Guarantee
Please observe the enclosed terms of guarantee.
Possible faults
Before each fault elimination:
Switch off device
Wait unitl the saw comes to a stop
Pull out power plug
After each fault clearance, put into operation and recheck all security installations.
Fault Possible cause Remedy
Machine fails to start after switching on
Power failure
Extension cable defect
Motor or switch defect
Check the fuse.
Check cable, no longer use defect cable
Have motor or switch checked by an approved
electrician or replaced by original spare parts
Machine stops while cutting
Saw blade blunt
Feed is too great
Replace saw blade or have it sharpend
Allow motor to cool and proceed working with less
pressure
Burned spots at the cut areas
Saw blade blunt Replace saw blade or have it sharpend
Saw vibrates
Saw blade is warped
Saw blade not properly mounted
Replace saw blade or have it sharpend
Mount saw blade properly
Recuperating mechanism of the jigging
device does not work
Recuperating spring broken or worn out
Recuperating bolt popped out from its bracket
Replace the recuperating spring
Insert the recuperating bolt in its bracket and secure it
with a cotter pin
Decelaration too slow (time to dead stop
>10 sec.)
Motor brake defective Have motor or switch checked by an approved
electrician or replaced by original spare parts
Technical data
Type BWS 400
Motor rating P
1
1.8 kW S6 - 40 %
Mains voltage 230 V
Mains frequency 50 Hz
No-load speed n
0
2990 min
-1
Mains fuse 16 A träge
Protection class IP 54
carbide tipped saw blade maximal 400 mm
Saw blade location hole 30 mm
Number of teeth 40
Saw blade thickness 2.2 mm
Cut width 3.0 mm
max. cutting capacity approx. 120 mm
Dimensions (length x breadth x height) 860 x 940 x 1000 mm
Weight (N.W.) 35.5 kg
Description of device / spare parts
Pos. Order-No. Denomination Pos. Order-No. Denomination
1 Pre-assembled device unit 15
Saw blade ( 400mm x 3,0 x 2,2 x 30 x 40T)
2 Brace 16 Rear saw blade flange
3 Motor P
1
1,8 KW 17 Locking nut M 20
4 Switch 18 Cover
5 Jigging device 19 Handle
6 Recuperating bolt 20 Support extension
7 Saw blade cover 21 Star grip knob M6x40
8 Chain 21A Star grip knob M6x20
9 Securing cotter pin 22 Length stop
10 Recuperating spring 24 Set of plastics insert
12 Safety chain 27 Safety label
13 Saw blade casing 28 Slip-on foot – small
14 Front saw blade flange 29 Slip-on foot – big
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Atika BWS 400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Atika BWS 400 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 2,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info