520775

Atika BTU450 Manual

18
Zoom out
Zoom in
Previous page
1/92
Next page
17
3. Insert rod (33) into motor-shaft and unscrew bolt (
left-hand-thread)
4. Now, the front saw blade flange (27) and the saw blade (26) can be
removed.
5.
L Clean the saw blade flanges.
6. Install a new or sharpened saw blade.
L Pay attention to the correct running direction of the saw blade: The
arrow on the saw blade and the arrow on the protective cover must point
in the same direction!
7. Position the front saw blade flange again.
8. Re-tighten the clamping nut (28).
9. Secure the table insert.
10. Fold the safety guard back to its original position.
Replacing the table insert
Disconnect the mains plug before changing the table
insert.
Immediately replace a worn or damaged table insert.
1. Fold back the safety guard (15).
2. Loosen the screws of the table insert (6) and move it back.
3. Remove the 2 nuts (a) and remove the blade guard (12) together with the
safety guard.
4. Install a new table insert (6).
5. Secure the blade guard with the safety guard (for blade guard adjustment
see figure 13).
6. Secure the table insert.
7. Fold the safety guard back to its original position.
Blade guard adjustments
The adjustment of the blade guard must be checked after each saw blade
and table insert change.
Transport
Before each transport:
− Switch off device
− Wait unitl the saw comes to a stop.
− Pull out power plug
− Accessories such as stops must be securely
mounted or clamped on the machine.
Storage
Pull out power plug
Store unused equipment in a dry, locked place out of the reach of children.
Before a longer period of storage carry out the following to extend the saw
service life and ensure an easy operating:
− thoroughly clean the device
− treat all movable parts with an environmentally friendly oil
L
Never use any grease!
Guarantee
Please observe the enclosed terms of guarantee.
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Atika BTU450 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Atika BTU450 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 2,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info