Manual Atika BTU450 (page 17 of 92) (English, German, Dutch, French, Italian, Polish)

520775

Zoom out

Zoom in

1/92

Using the movable cross stop

Connecting a chip extractor

Chip ejector slot closed (operation with chip extractor)

A chip extractor can be connected to the saw to extract the chips. (Diameter

of extractor nozzle: 100 mm.) Close the sealing blade on the chip ejector slot

and secure it using the machine knob.

Chip ejector slot open (operation without chip extractor)

Maintenance and cleaning

Before each maintenance and cleaning work

− Switch off device

− Wait unitl the saw blade comes to a stop.

− Pull out power plug

Maintenance and repair work other than those described in this chapter is

only allowed to be carried out by service staff.

For maintaining and cleaning, removed security devices must unconditionally

be mounted properly and proved again.

Use only original parts. Other parts can result in unexpected damages and

injuries.

Cleaning

L Observe the following to maintain the operability of the machine:

 Do not wash down device with water.

 Remove shavings and dust only with a brush or vacuum cleaner.

 Regularly clean and oil all movable parts (e.g. fasteners of the guard).

Fig. 10

L Never use any grease!

 Use for instance sewing machine oil, liquid hydraulic fluid or

environmentally acceptable spray oil.

 Take care that the saw blade remain free of rust and resin.

 Resin residues must be removed from the table board.

L Resin residues can be removed with a commercial maintenance

and care spray.

 The saw blade is a wearing part and will become dull after prolonged or

frequent use.

 Renew the saw blade or have it sharpened.

Maintenance

Changing the saw blade

Remove the mains plug before changing the saw

blade.

Danger of cutting! The saw blade is massive and it could be to slick.

Wear gloves when replacing the saw blade.

 Do not use any saw blades made of HSS steel.

 Do not use any cracked saw blades or such that have changed their

shape.

 Saw blades the body of which is broken must be discarded (no repair

allowed).

 Only use well-sharpened saw blades.

 Regrinding (sharpening) of saw blades is only allowed to be done by

qualified personnel. In particular note the following: Make sure that the

requirements for balancing of the tools according to EN 847-

1:2005+A1:2007 6.2.3.2 are met.

Danger of burning! The saw blade is still hot shortly after cutting.

1. Fold the safety guard backwards.

2. Loosen the screws of the table insert and move it back.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Atika BTU450 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 2,14 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Atika BTU450 Manual

Product: