520775
12
Zoom out
Zoom in
Previous page
1/92
Next page
11
Do not operate machine before having read the
operating instructions, understood all the notes and
assembly the machine as described here.
Keep the instructions in a safe place for future use.
Contents
Declaration of conformity 11
Extent of delivery 11
Characteristics noise values 11
Operating times 11
Symbols machine 11
Symbols operating instructions 12
Normal intended use 12
Risidual risks 12
Safety working 12
Before the first start-up 13
Start-up 14
Working with the saw 15
Maintenance and cleaning 16
- Changing the saw blade 16
- Replacing the table insert 17
Transport 17
Storage 17
Guarantee 17
Possible faults 18
Technical data 18
Description of device / spare parts 19
EC Declaration of Conformity
according to EC directive 2006/42/EC
We,
ATIKA GmbH & Co. KG
Schinkelstraße 97
59227 Ahlen - Germany
herewith declare under our sole responsibility that the product
Baukreissäge (construction circular saw) type
BTU 450
Serial number: see last page
is conform with the above mentioned EC directives as well as with the
provisions of the guidelines below:
2004/108/EC, 2000/14/EC and 2006/95/EC
Following harmonized standards have been applied:
EN 60204-1:2006; EN 1870-1:2007+A1:2009; EN 55014-1:2006;
EN 55014-2:1997+A1; EN 61000-3-2:2006: EN 61000-3-11:2000
Conformity assessment procedure: 2000/14/EC - Appendix V
Measured level of the acoustic output L
WA
= 106,3 dB(A)
Guaranteed level of the acoustic output L
WA
= 110 dB(A)
EC type examination carried out by :
Fachausschuss Holz – Vollmoellerstraße 11 – 70563 Stuttgart – Nr.: 0392
Certificate no.: HO 101119
Keeping of technical documents at:
ATIKA GmbH & Co. KG – Technical department – Schinkelstr. 97
59227 Ahlen – Germany
Ahlen, 21.05.2010 A. Pollmeier, management
Extent of delivery
1 Construction circular saw
1 Parallel limit stop
1 Pushstick
Assembly accessories for saw blade change
Operating manual
Check the machine for:
¾ That it is complete
¾ Check for possible transport damage
Report any damage or missing items to your dealer, supplier or the
manufacturer immediately. Complaints made at a later date will not be
acknowledged.
Characteristics noise values
EN ISO 3744:1995 / EN ISO 11202:1995/AC:1997 /
ISO 7960:1995 Appendix A, A.2 b)
Application of the machine as construction circular saw with standard saw
blade.
Guaranteed sound power level
L
WA
= 110 dB(A)
Sound pressure level at the workplace No-load L
PA
= 86,6 dB(A)
Load L
PA
= 94,5 dB(A)
The factor of measurement uncertainty is K = 4 dB.
The values given are emission values and must therefore not simultaneously
represent safe workplace values too. Although there is a relationship between
emission and immersion levels, it can be reliably deduced whether additional
precautionary measures are necessary or not. Factors, which can influence the
immersion level currently existing at the workplace include the duration of the
effects, the special type of the workroom, other noise sources, etc. e.g. the
number of machines and other adjacent processes. The permissible workplace
values can also vary from country to country. This information should however
enable an improved assessment of the danger and risk to be carried out.
Operating times
Before initiating the device please observe the provisions pertaining to
corresponding laws (regional provisions) for the noise control.
Symbols machine
Carefully read opera-
tor’s manual and the
safety instructions be-
fore starting the machine
and observe the
instructions when
operating.
Shut off engine and
remove power cord
before performing
cleaning, maintenance or
repair work.
Wear ear protection!
Electrical devices do not go into the domestic rubbish. Give
devices, accessories and packaging to an eco-friendly recycling.
According to the European Directive 2002/96/EC on electrical
and electronic scrap, electrical devices that are no longer
serviceable must be separately collected and brought to a facility
for an environmentally compatible recycling.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Atika BTU450 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Atika BTU450 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 2,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info