701023
16
Zoom out
Zoom in
Previous page
1/146
Next page
16
Proper use
The device is suitable for cutting wood, wood like materials
and plastics.
Round materials (logs, pipes, etc.) are not permitted to be
cut without a special device for this purpose.
When endwise sawing plain work pieces a suitable stop
angle must be used for a safe guidance.
Only materials that can be safely placed are allowed to be
cut.
The intended usage also includes compliance with the
operating, servicing and repair conditions prescribed by the
manufacturer and following the safety instructions included
in the instructions.
Follow the relevant accident prevention rules for operation
and other generally recognised health and safety at work
rules.
Any other use is deemed not to be use as prescribed. The
manufacturer is not liable for any type of damage resulting
from this: the user bears the sole risk.
Unauthorised modifications on the device exclude a liability
of the manufacturer for damages of any kind resulting from
it.
Only persons who are familiarised with the device and
informed about possible risks are allowed to prepare,
operate and service this device. Repair works may only be
carried out by us or by a customer service agent nominated
by us.
This machine must not be used in an explosive environment
or exposed to rain.
Metallic parts (wires etc.) have unconditionally to be
removed from the material to be cut.
Residual risks
Even if used properly, residual risks can exist even if the
relevant safety regulations are complied with due to the design
determined by the intended purpose.
Residual risks can be minimised if the “Safety advices” and the
“Intended usage” as well as the whole of the operating
instructions are observed.
Observing these instructions, and taking proper care, will
reduce the risk of personal injury or damage to the equipment.
Risk of injury to fingers and hands by the tool (saw band) or
work piece, e.g. during saw band replacement.
Injury by catapulted workpiece parts.
Throwback of the workpiece or workpiece parts.
Breakage and expulsion of saw band.
Risk from electricity when using improper electrical
connections.
Touching live parts of opened electrical components.
Impairment of hearing when working on the machine for
longer periods of time without ear protection.
Emission of harmful wood dust when working without
shavings exhaustor.
In addition, in spite of all the precautionary measures taken,
non-obvious residual risks can still exist.
Safe working
Woodworking machines can be dangerous if not used
properly. If electrical tools are used, the fundamental
safety precautions must be met to preclude the risks of
fire, electric shock and injuries to persons.
Before starting this device, read and keep to the following
advice. Also observe the preventive regulations of your
professional association and the safety provisions
applicable in the respective country, in order to protect
yourself and others from possible injury.
Pass the safety instructions on to all persons who work
with the machine.
Keep these safety instructions in a safe place.
Make yourself familiar with the equipment before using
it, by reading and understanding the operating
instructions.
Be attentive. Be careful what you do. Behave sensibly
when working. Do not use a power tool while you are
tired or under the influence of drugs, alcohol or
medication. A moment of inattention while operating
power tools may result in serious personal injury.
Do not overreach. Provide a safe standing position and
keep at any time the balance.
Wear suitable work clothes:
Do not wear loose-fitting clothes or jewellery, they could
be caught by movable parts.
- slip-proof shoes
Hairnet in case of long hair
Wear personal protective equipment:
Ear protection (the noise level on the workplace may
exceed 85 dB (A))
Safety goggles
Dust mask with work activities generating dust
Only operate the band saw on a
firm
level
slip-free
vibration free surface
Keep your workplace in an orderly condition! Untidiness can
result in accidents.
Provide a safe standing position and keep at any time the
balance. Do not lean forward.
Take environmental influences into consideration:
Do not expose the machine to rain.
Do not use the machine in humid or wet environment.
Provide for good illumination.
Do not use this machine near inflammable liquids or
gases.
The wood dust generated during operation impedes the
necessary view and is harmful to health to some degree.
Unless the machine is used outdoors, it must be
connected to a chip exhaust system (e.g. portable dust
remover).
Never leave the machine unattended.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Atika BS 205-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Atika BS 205-2 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish as an attachment in your email.

The manual is 1,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Atika BS 205-2

Atika BS 205-2 Installation Guide - English, German, Dutch, Danish, French, Italian, Polish, Swedish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info