701023
15
Zoom out
Zoom in
Previous page
1/146
Next page
15
You may not start to operate the machine until
you have read these operating instructions,
observed all the instructions given and
installed the machine as described!
Keep the instructions in a safe place for future use.
Contents
EC Declaration of Conformity 3
Extent of delivery 15
Characteristic noise values 15
Symbols on the machine / in the operating instructions 15
Proper use 16
Residual risks 16
Safe working 16
Description of device / spare parts 18
Assembly 18
Preparing for startup 18
Start-up 19
Settings on the saw 19
Working with the saw 20
Maintenance and cleaning 21
Transport 22
Storage 22
Guarantee 22
Technical Data 23
Possible faults 24
Extent of delivery
Band saw BS 205-2 (pre-assembled device unit)
Saw table Fastener bag
Stopper guidance profile Operating instructions
Table insert Assembly and operating
Parallel stopper
Crossfeed stop
instruction sheet
Warranty declaration
Pushstick
After unpacking, check the contents of the box for
completeness
possible transport damage.
Report any damage or missing items to your dealer, supplier or
the manufacturer immediately. Complaints made at a later date
will not be acknowledged.
Characteristic noise values
DIN EN ISO 11688-1
Application of the machine as band saw with standard saw
band.
Sound power level Sound pressure level
L
WA
= 90.4 dB(A) L
pA
= 77.4 dB(A)
Measuring uncertainty K: 3 dB(A)
The values given are emission values and must therefore not simultaneously
represent safe workplace values too. Although there is a relationship between
emission and immission levels, it can be reliably deduced whether additional
precautionary measures are necessary or not. Factors, which can influence
the immission level currently existing at the workplace include the duration of
the effects, the special type of the workroom, other noise sources, etc. e.g.
the number of machines and other adjacent processes. The permissible
workplace values can also vary from country to country. This information
should however enable an improved assessment of the danger and risk to be
carried out.
Symbols on the machine
Read and follow the operating instructions
and safety advices before starting up the
machine.
Wear eye and ear protection.
Switch off the motor and disconnect the
mains plug before performing cleaning,
maintenance or repair work.
Do not expose to rain. Protect against
humidity.
Risk of injuries of fingers and hands by the
saw band.
This product complies with European
regulations specifically applicable to it.
Electrical devices do not go into the domestic
rubbish. Give devices, accessories and
packaging to an ecofriendly recycling.
According to the European Directive
2012/19/EU on electrical and electronic scrap, electrical
devices that are no longer serviceable must be separately
collected and brought to a facility for an environmentally
compatible recycling.
Symbols operating instructions
Potential hazard or hazardous situation. Failure to
observe these instructions may lead to injuries or
cause damage to property.
Important information on proper handling. Failure
to observe these instructions may lead to malfunction.
User information. This information helps you to use
all the functions optimally.
Assembly, operation and servicing. Here you are
explained exactly what to do.
Please refer to the attached assembly
and operating instruction sheet for
references to figure numbers in the text.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Atika BS 205-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Atika BS 205-2 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish as an attachment in your email.

The manual is 1,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Atika BS 205-2

Atika BS 205-2 Installation Guide - English, German, Dutch, Danish, French, Italian, Polish, Swedish - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info